674768
81
Zoom out
Zoom in
Previous page
1/173
Next page
81
Scanning Function
Programmable Memory Channel Scan (PMS)
Registering to the Programmable Memory Channels
50 sets of PMS memory channels (L1/U1 to L50/U50) are available.
To specify a range of frequencies to scan, register the lower limit frequency to a memory
channel L1 to L50 and the upper limit frequency to a memory channel U1 to U50. Make
sure to use the corresponding numbers for the lower and upper limit memory channels.
PMS memory channels (L1/U1 to L50/U50) are listed after memory channel 999. Pressing
the
key advances the memories at 100-channel increments.
For details on registering frequencies to the memory channels, see “Registering to
Memory Channel” on page 55.
Cautions
y If the upper and lower limit frequencies are set in different steps, the scan width must be 100 kHz or
more.
y The lower and upper limit memory channels must be within the same frequency band. Programmable
memory channel scanning does not function if the frequency bands are different.
Performing Programmable Memory Channel Scan
The programmable memory channel scan allows setting a specified frequency range
within the same frequency band.
1 Press the key to enter Memory mode.
2 Recall the PMS memory channel to which the lower limit or upper limit of the frequency
is registered.
3 Touch [F MW].
The function menu appears on the LCD.
4 Touch [SCAN].
Programmable memory channel scanning starts.
During scanning, “PMS” and “P*” appear.
Tips Rotate the DIAL clockwise to start scanning toward higher
frequencies.
Rotate the DIAL counterclockwise to start scanning toward
lower frequencies.
When a signal is received during scanning, scanning stops
for 5 seconds to receive the signal on frequency.
When scanning stops, the decimal point blinks and the LCD
remains illuminated.
After receiving the signal for 5 seconds, scanning resumes.
Touch [STOP] or press
to cancel scanning.
After scanning is canceled, press the
key twice to
return to VFO mode.
The decimal point blinks.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info