674768
80
Zoom out
Zoom in
Previous page
1/173
Next page
80
Scanning Function
Memory Channel Scanning
8 Press the key to enter Memory mode.
9 Touch [F MW].
10 Touch [BANK].
11 Press the key.
12 Rotate the DIAL to select the memory bank to begin memory scanning from.
The memory bank number is changed from [B] to [b] and
the bank link scanning is activated.
13 Press the key.
The memory banks for which you perform memory bank
link scanning are determined.
14 Touch [F MW].
The function menu screen appears.
15 Touch [SCAN].
Tips Scanning is performed toward the higher memory
channel numbers.
Rotate the DIAL clockwise: Scanning is performed
toward the higher memory channel numbers.
Rotate the DIAL counterclockwise: Scanning is performed toward the lower
memory channel numbers.
When a signal is received during scanning, scanning stops for 5 seconds and
this frequency is received.
When scanning is suspended, the decimal point blinks and the LCD stays lit.
After receiving the frequency for 5 seconds, scanning resumes.
To stop scanning, touch [STOP] or press .
You can select the range for scanning by pressing and holding the key for
over one second to enter Set mode, then selecting
[SCAN][5 SCAN WIDTH].
y Canceling Bank Link Scanning
1 Press and hold the key for over one second.
The transceiver enters Set mode.
2 Touch [MEMORY].
3 Touch [1 BANK LINK].
4 Rotate the DIAL to select the memory bank.
5 Press the key.
The memory bank display is changed from to and the bank link scanning is
deactivated.
6 Repeat steps 4 and 5 to select other memory banks.
7 Press .
The transceiver exits from Set mode.
The memory bank number is
changed from [B] to [b]
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info