674768
41
Zoom out
Zoom in
Previous page
1/173
Next page
41
Basic Operation
Performing Communication
Cautions
y Use the transceiver at the minimum required transmit power level. Doing so prevents the transceiver
from overheating and saves battery power, increasing the operating time.
y Do not continue transmitting for a prolonged period. The transceiver can overheat, resulting in
malfunction or a burn injury.
y If transmission is continued for a long period, the transceiver overheats and the high temperature
protection function is activated. As a result, the transmitting power level is automatically set to Low
Power. If you continue transmitting while the high temperature protection function is active, the
transceiver will be forcibly returned to the receive mode.
y If you touch the transceiver immediately after the high temperature protection function has become
active, you may be burned. Wait for the temperature inside the transceiver to cool sufficiently before
resuming transmission.
y Do not start transmitting without attaching the antenna. The transmitter circuit can be damaged.
Tips
In FM mode, you can transmit on the 144 MHz and 430 MHz ham radio bands.
Even while receiving in AM mode, transmit will continue to be in NFM mode when pressing
.
The transmit power level may be changed by touching [F MW] followed by [TXPWR] (
see page
46).
Transmit power level settings are different when using the chargeable battery pack, or using the
alkaline battery case.
For more details, see “Turning on the Transceiver” on page 32.
If
is pressed when a frequency other than the amateur ham radio band is selected, an alarm tone
(beep) will be emitted and “ERROR” appears on the LCD, disabling transmission.
The transceiver may be set to inhibit transmit while receiving a signal. Press and hold
key
for over one second to activate Set mode, then rotate the DIAL to the setting from [CONFIG] [2
BCLO], and then select [ON].
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info