674768
40
Zoom out
Zoom in
Previous page
1/173
Next page
40
Basic Operation
Performing Communication
y Fixing the Communication Mode
To fix the transmission mode for operation, touch [MODE] to switch the communication
mode.
Touching [MODE] each time toggles the communication mode as follows.
[
(AMS)] → [DN (V/D mode)] → [VW (FR mode)] → [FM (analog)]
Operation mode Icon Description of Modes
AMS
(Automatic Mode Select)
The transmit mode is automatically selected from the 4 types,
corresponding to the received signal.
(The “DN” part of the icon differs depending on the type of the
received signal.)
By touching [TX DN], you can change the AMS function operation.
TX M: Automatically selects one of the 4 communication modes
according to the received signal. Briefly pressing PTT on
the microphone switches between digital mode and analog
mode.
TX FM: Automatically selects one of the 4 communication modes
according to the received signal. Always switches to FM
mode for transmission.
TX DN: Automatically selects one of the 4 communication modes
according to the received signal. Always switches to DN
mode for transmission.
TX VW: Automatically selects one of the 4 communication modes
according to the received signal. Always switches to VW
mode for transmission.
AUTO: Automatically selects one of the 4 communication modes
according to the received signal.
V/D Mode
(Voice/Data simultaneous
transmission mode)
DN Calls are less prone to interruptions due to detection and correction
of voice signals during digital voice signal transmission. This is the
standard mode for C4FM FDMA Digital.
Voice FR Mode
(Voice Full Rate Mode)
VW High speed data communication using entire 12.5 kHz band.
Enables high-quality voice communication.
Data FR Mode (High Speed
Data Communication Mode)
DW Digital voice data transmission using the entire 12.5 kHz band.
The transceiver automatically switches to this mode during image
transmission.
Analog FM Mode FM Analog communication using FM mode.
Effective when the signal is weak and audio is susceptible to
interruption in digital mode.
Caution
In V/D mode (“DN” on the LCD), position information is included in the radio wave during voice
communication, however, position information is not included in the Voice FR mode (“VW” on the LCD).
Transmitting/Receiving Signals
1
While pressing and holding , speak into the microphone.
Keep your mouth about 5 cm away from the microphone when you speak.
2 Release .
The transceiver returns to receive mode.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info