674767
78
Zoom out
Zoom in
Previous page
1/156
Next page
78
Convenient Functions
Dual Reception (DW) Function
Tips
For broadcast station frequencies, refer to “Preset Broadcast Station Frequencies List (See page
54)” or a commercially sold frequencies list.
AF-DUAL reception function can be used for the radio frequency registered to the memory bank.
• Pressing T while a signal is being received, will switch to receiving the standby reception
frequency.
With the AF-DUAL Function, an A Band or B Band registered with a AM broadcast (middle wave
frequency) or a FM broadcast frequency, set for standby reception, cannot be simultaneously
received while listening to the radio.
To disable the AF-DUAL Function, press F and then 6.
The frequency registered to the standby (memory channel) appears on the LCD.
O Setting the resumption time of radio reception
While receiving radio broadcast (active side) and ham radio band (A-band or B-band) on
standby side, the transceiver may be set to resume receiving the broadcast audio [After
loss of receive signal] or [After transmission].
1 Press and hold M for over 1 second to enter the Set
mode.
2 Turn O to select [2 TX/RX].
3 Press H.
4 Turn O to select [3 AUDIO].
5 Press H.
6 Turn O to select [3 RX AF DUAL].
7 Press H.
8 Turn O to select reception time.
Set transmission time as well.
Transmission and reception for 1 second to 10 seconds,
HOLD (Fixed), or transmission for 1 second to 10 seconds.
Remarks Default setting: transmission and reception for 2 seconds
Display Operation
Transmission and
reception: 1 second
to 10 seconds
While receiving radio broadcast and ham radio band frequencies (A-band
and B-band) on standby simultaneously with [AF-DUAL Reception
Function], resumption of receiving radio broadcast can be set to [After
loss of receive signal] or [After transmission]. For example, if 5 seconds
is selected, radio reception resumes after 5 seconds after reception (or
transmission) ends.
Fixed While receiving radio broadcast and ham radio band frequencies (A-band
and B-band) on standby simultaneously with [AF-DUAL Reception
Function], the transceiver will continue to receive a signal over that
frequency after signal detection without switching back to radio broadcast.
FT1DR_DE_Eng.indb 78FT1DR_DE_Eng.indb 78 13/06/28 15:1613/06/28 15:16
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info