674767
77
Zoom out
Zoom in
Previous page
1/156
Next page
77
Convenient Functions
Dual Reception (DW) Function
Caution
Be sure to set a memory channel as the Priority Memory Channel for standby before using this
function.
Tips
The Priority Memory Channel is set to the Memory Channel number 1 by default.
Pressing and holding M over 1 second and changing the Set mode option allows you to use this
function more conveniently.
[5 SCAN]  [1 DW TIME]: The interval for monitoring the Priority Memory Channel can be changed.
[5 SCAN]  [4 SCAN RESUME]: The resumption conditions for Dual Reception can be changed.
The combination of the frequency bands and modes of the frequency for the Priority Memory
Channel (standby side) and the frequency for continual signal reception (active side) can be freely
changed.
AF-DUAL Function for simultaneous signal reception over the
other frequency while listening to the radio
The AF-DUAL Reception Function allows reception of a radio broadcast, while standby
reception of A-band or B-band frequency (or frequency registered to a memory channel)
is active. When standby reception is active, voice received over that frequency cannot
be heard, however if a voice signal is detected, the reception of the radio broadcast will
be paused and voice will be heard. Although there is a similar function in Dual Reception
(See page 76), because a signal reception over the frequency registered to the priority
memory channel is checked approximately every 5 seconds in Dual Reception, the
reception for radio broadcast is interrupted every time this happens. With the AF-DUAL
Reception Function, the reception of radio broadcast is interrupted only when there is a
calling signal from another transceiver.
O Listening Radio Broadcast with AF-DUAL Reception Function
1 Set the A-band or B-band frequency (or Memory Channel/Home Channel) for
standby. Set the standby reception frequency for A-band or B-band (or Memory
Channel/ Home Channel) to monitor for calls while receiving radio broadcast.
Tips You can listen to radio broadcast while scanning the standby signal reception frequencies.
Radio broadcast can be listened to while monitoring the standby signal reception frequency
in the dual reception mode.
2 Press A to set the operating band to A-band.
3 Press F and then 6 to activate the AF-Dual function.
4 Press B and select [AM] or [WFM].
The broadcast band is toggled in the following order every
time B is pressed:
AM broadcast (middle wave band) FM broadcast AM
broadcast (middle wave band)
On the LCD, AM (AM broadcast) or WFM (FM broadcast)
is displayed.
5 Turn O to tune in to the frequency of broadcast station.
FT1DR_DE_Eng.indb 77FT1DR_DE_Eng.indb 77 13/06/28 15:1613/06/28 15:16
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info