674767
59
Zoom out
Zoom in
Previous page
1/156
Next page
59
Scanning Function
Using the Scanning Function
Selecting a Reception Method When Scanning Stops
When scanning stops, you can select one of the following three reception methods:
(1) The signal is received for the specified period of time, and then scanning resumes.
You can specify this period of time in steps of 0.5 second within the range from 2 to
10 seconds.
(2) The signal is received until it fades out. Two seconds after the signal fades out,
scanning resumes. [BUSY] appears on the LCD.
(3) Scanning stops and the current frequency is received. [HOLD] appears on the LCD.
1 Press and hold M for over 1 second.
2 Turn O to select [5 SCAN].
3 Press H.
4 Turn O to select [4 SCAN RESUME].
5 Press H.
6 Press H again.
7 Turn O to specify the reception method.
Select a reception method from [2 SEC TO 10 SEC (0.5
SEC STEP)], [BUSY], and [HOLD].
8 Press p to save the specified reception method and exit
from the Set mode.
Tips
The reception method selected here is also applied to [VFO Scanning], [Programmable Memory
Channel Scanning] and [Memory Channel Scanning].
The scanning restart time after BUSY (duration of signal reception) can be changed by selecting the
Set mode option [5 SCAN RESTART]  [3 SCAN RE-START].
Memory Channel Scanning
Frequencies registered to the memory channels can be scanned in the order of memory
channel number.
1 Switch to the Memory mode and recall a memory channel.
2 Press F and then 2.
Scanning (SCAN) is performed toward higher memory
channel numbers.
When a signal is received, the decimal point blinks.
䎶䎦䎤䎱䎃䎶䎦䎤䎱䎃䎵䎨䎶䎸䎰䎨䎵䎨䎶䎸䎰䎨
䎃䎃
䎦䎤䎱䎃
䎦䎤䎱䎃
䎧䎺䎃䎃䎃䎃䎧䎺䎃䎃䎃䎃 䎝䎃䎃䎫䎲䎯䎧䎃䎃䎝䎃䎃䎫䎲䎯䎧䎃䎃
䋱䋶䋰
When a signal is received,
the decimal point blinks.
FT1DR_DE_Eng.indb 59FT1DR_DE_Eng.indb 59 13/06/28 15:1613/06/28 15:16
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info