674767
43
Zoom out
Zoom in
Previous page
1/156
Next page
43
Using the Memory
A Wide Variety of Memory Functions
Registering to Memory Channel
Caution
The information such as operating frequency that is registered to memory channels can be corrupted
due to wrong operation, static electricity, or electrical noise. Also, it can be erased in the case of a
failure or repair. Be sure to write it down on paper or otherwise save the information (See pages 137
to 138).
The transceiver allows you to use 900 memory channels (memory channel numbers 1
to 900).
1 Switch to the VFO mode.
2 Tune in to a frequency by turning O.
Select the frequency you want to register to a memory
channel.
3 Press and hold F over 1 second.
Enters the Memory Channel Registration mode, and
the number of the memory channel next to the memory
channel to which you registered a frequency last blinks.
Remarks To cancel the memory channel registration, press the p
switch.
To register a frequency to a memory channel specified, Turn O to select the memory
channel.
The ( icon indicating [The specified memory channel is unregistered] lights, and the
memory channel blinks.
The ) icon indicating [The specified memory channel is registered] lights.
Pressing M each time skips memory channels quickly in steps of 100 memory
channels.
4 Press F to complete the memory channel registration. The registered frequency
appears on the LCD.
When registering a frequency to a memory channel already registered, “Overwrite
OK?” appears on the LCD.
Tips
By default, 144.000 MHz is registered to the memory channel 1. It can be changed to another
frequency, but not be deleted.
The frequency which has been registered to a memory channel can be overwritten with a new
frequency.
When you attempt to register a new frequency to a memory channel, an unregistered memory
channel appears.
To display the lowest unregistered memory number when you register a frequency to a memory
channel, press and hold M over 1 second to enter the Set mode, and then select [3 MEMORY]
[6 MEMORY WRITE].
To inhibit registration to all memory channels, press and hold M over 1 second to enter the Set
mode, and then select [3 MEMORY]  [4 MEMORY PROTECT].
FT1DR_DE_Eng.indb 43FT1DR_DE_Eng.indb 43 13/06/28 15:1613/06/28 15:16
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info