674752
144
Zoom out
Zoom in
Previous page
1/164
Next page
Page 142 FT DX 9000MP OPERATION MANUAL
MENU MODE
RX DSP GROUP
078. MAIN-CONTOUR-LEVEL
Function: Adjusts the parametric equalizer gain of
the main band (VFO-A) receiver Contour filter.
Available Values: –40 ~ +20 dB
Default Setting: –15 dB
079. MAIN-CONTOUR-WIDTH
Function: Adjusts the Q-factor of the main band (VFO-
A) receiver Contour filter.
Available Values: 1 - 11
Default Setting: 10
080.SUB-CONTOUR-LEVEL
Function: Adjusts the parametric equalizer gain of
the sub band (VFO-B) receiver Contour filter.
Available Values: –40 ~ +20 dB
Default Setting: –15 dB
081. SUB-CONTOUR-WIDTH
Function: Adjusts the Q-factor of the sub band (VFO-
B) receiver Contour filter.
Available Values: 1 ~ 11
Default Setting: 10
082. IF-NOTCH-WIDTH
Function: Selects the bandwidth of the DSP NOTCH
filter
Available Values: NARROW/WIDE
Default Setting: WIDE
083. MAIN-CW-SHAPE
Function: Selects the passband characteristics of the
main band (VFO-A) DSP filter for the CW mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
084. MAIN-CW-SLOPE
Function: Selects the shape factor of the main band
(VFO-A) DSP filter for the CW mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
085. MAIN-CW-NARROW
Function: Selects the passband of the main band
(VFO-A) DSP filter for the CW “narrow” mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
086. MAIN-PSK-SHAPE
Function: Selects the passband characteristics of the
main band (VFO-A) DSP filter for the PSK mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
087. MAIN-PSK-SLOPE
Function: Selects the shape factor of the main band
(VFO-A) DSP filter for the PSK mode.
Available Values: GENTLE/MEDIUM/STEEP
Default Setting: MEDIUM
088. MAIN-PSK-NARROW
Function: Selects the passband of the main band
(VFO-A) DSP filter for the PSK “narrow” mode.
Available Values: 25/50/100/200/300/400 Hz
Default Setting: 300 Hz
089. MAIN-RTTY-SHAPE
Function: Selects the passband characteristics of the
main band (VFO-A) DSP filter for the RTTY mode.
Available Values: SOFT/SHARP
Default Setting: SHARP
SOFT: Primary importance attached to amplitude
of the filter factor.
SHARP: Primary importance attached to phase of the
filter factor.
IF
BANDWIDTH
“+” Gain
“Q”
--
” Gain
CONTOUR “GAINAND “Q”
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000MP in the language / languages: English as an attachment in your email.

The manual is 11,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info