674754
134
Zoom out
Zoom in
Previous page
1/156
Next page
Page 132 FTDX9000D OPERATION MANUAL
MENU MODE
DISPLAY GROUP
013. TFT COLOR
Function: Selects the TFT color.
Available Values: COOL BLUE/CONTRAST BLUE/
FLASH WHITE/CONTRAST UMBER/UMBER
Default Setting: COOL BLUE
014. DIMMER-METER
Function: Setting of the meter brightness level when
“DIM” is selected.
Available Values: 0 ~ 15
Default Setting: 4
015. DIMMER-VFD
Function: Setting of the frequency and TFT display
brightness level when “DIM” is selected.
Available Values: 0 ~ 15
Default Setting: 8
016. BAR DISPLAY SELECT
Function: Selects one of three parameters to be
viewed on the Tuning Offset Indicator.
Available Values: CLAR/CW TUNE/VRF-µTUNE/
NOTCH
Default Setting: CW TUNE
CLAR: Displays relative clarifier offset.
CW TUNE: Displays relative tuning offset between
the incoming signal and transmitted
frequency.
VRF-µTUNE: Displays the peak position of the VRF
or µTUNE filter.
NOTCH: While you rotate the NOTCH knob,
the center frequency of the IF NOTCH
feature will be indicated.
017. ROTATOR START UP
Function: Selects the starting point of your controller’s
indicator needle.
Available Values: 0/90/180/270º
Default Setting: 0º
018. ROTATOR OFFSET ADJ
Function: Adjusts the indicator needle precisely to
the starting point set in menu selection 123.
Available Values: –30 - 0
Default Setting: 0
019. RIGHT TX METER
Function: Selects the Sub meter function
Available Values: ALC/VDD
Default Setting: ALC
ALC: Indicates incoming signal strength on the sub
band (VFO-B) while receiving, and indicates
the ALC (Automatic Level Control) operating
range while transmitting.
VDD: Indicates the Vdd (final amplifier drain voltage)
at all times.
020. QMB MARKER
Function: Enables/Disable the QMB Maker (White
arrow “”) to display on the Spectrum Band Scope.
Available Values: ENABLE/DISABLE
Default Setting: ENABLE
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info