674754
47
Zoom out
Zoom in
Previous page
1/156
Next page
Page 45FT DX 9000D OPERATION MANUAL
B
ASIC
O
PERATION
: R
ECEIVING
ON
A
MATEUR
B
ANDS
10. Rotate the Main Tuning Dial knob to tune around
the band, and begin normal operation.
Quick Note
H Clockwise rotation of the Main tuning Dial in-
creases the operating frequency, one “step” of the
synthesizer at a time; similarly, counter-clockwise
rotation of the Main tuning Dial will decrease
the frequency.
Two steps, one “normal” and one “fast,” are avail-
able on each operating mode. Pressing the
FAST key engages the “Fast” tuning selection.
Operating Mode 1 Step 1 Dial Rotation
LSB, USB, CW, RTTY, 10 Hz [100 Hz] 10 kHz [100 kHz]
PKT(LSB)
AM, FM, PKT(FM) 100 Hz [1 kHz] 100 kHz [1 MHz]
[ ]: FAST switch set to “ON”
OPERATION ON 60-METER
(
5 MHZ
)
BAND
(
U.S. VERSION ONLY
)
The FT DX 9000D includes the capability for transmission and reception on the five spot frequencies assigned to the
Amateur Service in the United States. To operate on the 5 MHz band:
1. Press the V/M key (# ) once to enter the
“Memory” mode (a memory channel number “USX”
will appear on the display in the Multi-Panel on the
TFT display.
2. Memory channels “US1” through “US5” are pre-pro-
grammed, at the factory, with the permitted frequen-
cies in the 5 MHz band, and the USB mode is auto-
matically selected on these channels.
3. To exit from 60-meter operation and return to the VFO
mode, just press the V/M key.
Note
The frequencies and operating mode for 5 MHz band op-
eration are both fixed, and may not be changed.
H It is possible to separate the frequency change over
one dial rotation, while operating solely on the
CW mode, using the Menu items “TUNING 129
MAIN DIAL STEP,” and “TUNING 130 MAIN
DIAL CW FINE” See page 144.
H If you want to navigate quickly, so as to effect
rapid frequency change, there are several tech-
niques available:
o Direct keyboard frequency entry of the fre-
quency (see page 57).
o Use the CLAR/VFO-B knob to tune in 1
MHz steps (see page 57).
o Use the microphone’s Up/Down scanning keys,
if your microphone is so equipped.
V/M key
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info