674745
133
Zoom out
Zoom in
Previous page
1/154
Next page
Page 131FT-
991
OperaTing Manual
Menu MODe
072 DATA PORT SELECT
Function: Selects the input jack of the data signal.
Available Values: DATA/USB
Default Setting: DATA
Description: Selects the input jack of the data signal
when
070 DATA IN SELECT
is set to
REAR
”.
DATA: Inputs the data from the
RTTY/DATA
jack
on the rear panel.
USB: Inputs the data from the
USB
jack on the
rear panel.
073 DATA OUT LEVEL
Function: Sets the output level during the sending/re-
ceiving of data
(
PSK31, SSTV, etc.
)
.
Available Values: 0 - 100
Default Setting: 50
Description: Sets the output level during the sending/
receiving of data
(
PSK31, SSTV, etc.
)
. The
higher the setting, the higher the output
level becomes.
074 FM MIC SELECT
Function: Selects the microphone input jack for FM
mode.
Available Values: MIC/REAR
Default Setting: MIC
Description: Selects the microphone input jack to be
used in FM mode.
FRONT: Inputs from the
MIC
jack on the front
panel.
DATA: Disables the microphone circuit on the
front panel and inputs from the
USB
jack or
PACKET
jack on the rear panel.
075 FM OUT LEVEL
Function: Sets the level of the FM receiving signal out-
put from the
RTTY/DATA
jack.
Available Values: 0 - 100
Default Setting: 50
076 FM PKT PTT SELECT
Function: Sets the PTT control for the FM signal.
Available Values: DAKY/RTS/DTR
Default Setting: DAKY
Description: Selects the PTT control method for the FM
signal.
DAKY: Controls the transmit from the
RTTY/
DATA
jack
(
pin 3
)
on the rear panel.
DTR: Controls the transmit from the USB vir-
tual COM/DTR ports.
RTS: Controls the transmit from the USB vir-
tual COM/RTS ports.
077 FM PKT PORT SELECT
Function: Selects the input jack of the FM packet signal.
Available Values: DATA/USB
Default Setting: DATA
Description: Selects the input jack of the FM signal
when
074 FM MIC SELECT
is set to
DATA
”.
DATA: Inputs from the
RTTY/DATA
jack on the
rear panel.
USB: Inputs from the
USB
jack on the rear pan-
el.
078 FM PKT TX GAIN
Function: Sets the transmission gain during the FM
packet operation.
Available Values: 0 - 100
Default Setting: 50
079 FM PKT MODE
Function: Sets the baud rate
(
communication speed
)
dur-
ing the FM packet operation.
Available Values: 1200/9600
Default Setting: 1200
080 RPT SHIFT 28MHz
Function: Sets the RPT offset frequency on the 28 MHz
band.
Available Values: 0 - 1000kHz
(
10kHz/step
)
Default Setting: 100kHz
Description: Sets the repeater offset frequency on the 28
MHz band.
081 RPT SHIFT 50MHz
Function: Sets the RPT offset frequency on the 50 MHz
band.
Available Values: 0 - 4000kHz
(
10kHz/step
)
Default Setting: 1000kHz
Description: Sets the repeater offset frequency on the 50
MHz band.
082 RPT SHIFT 144MHz
Function: Sets the RPT offset frequency on the 144 MHz
band.
Available Values: 0 - 4000kHz
(
10kHz/step
)
Default Setting: 600kHz
Description: Sets the repeater offset frequency on the
144 MHz band.
083 RPT SHIFT 430MHz
Function: Sets the RPT offset frequency on the 430 MHz
band.
Available Values: 0 - 10000kHz
(
10kHz/step
)
Default Setting: 5000kHz
Description: Sets the repeater offset frequency on the
430 MHz band.
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-991A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-991A in the language / languages: English as an attachment in your email.

The manual is 36,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info