478504

Yaesu FT-950 Manual

81
Zoom out
Zoom in
Previous page
1/132
Next page
Page 79FT-950 OPERATING MANUAL
CW CONVENIENCE FEATURES
CONTEST MEMORY KEYER
CHECKING THE CW MEMORY CONTENTS
1. Be sure that Break-in is still turned “Off” by the
[
BK-IN
]
button.
2. Press the
[
MONI
]
button to enable the CW monitor. A
“ ” icon will appear in the display.
3. Press and hold the
[
SELECT
]
knob for one second to
activate the Contest Memory Keyer. You will see one
of following indications in Multi-Display Window on
the display; “rEC1”, “rEC2”, “rEC3”, “rEC4”, “rEC5”,
“PLY1”, “PLY2”, “PLY3”, “PLY4”, or “PLY5”.
4. Rotate the
[
SELECT
]
knob to select the CW Memory
Register (“PLY1” through “PLY5”)
in which you wish to check the mes-
sage.
5. Press the
[
SELECT
]
knob momentarily. You will hear
the results in the sidetone monitor, but no RF energy
will be transmitted.
ON-THE-AIR CW MESSAGE PLAYBACK
1. Press the
[
BK-IN
]
button to enable transmission. Ei-
ther Full- or Semi-break-in will be engaged, depend-
ing on the setting of Menu item “043 A1A BK-IN.”
2. Press and hold the
[
SELECT
]
knob for one second to
activate the Contest Memory Keyer. You will see one
of following indications in Multi-Display Window on
the display; “rEC1”, “rEC2”, “rEC3”, “rEC4”, “rEC5”,
“PLY1”, “PLY2”, “PLY3”, “PLY4”, or “PLY5”.
3. Rotate the
[
SELECT
]
knob to select the CW Memory
Register (“PLY1” through “PLY5”)
that you wish to transmit.
4. Press the
[
SELECT
]
knob momentarily. The pro-
grammed message will be transmited on the air.
[
BK-IN
]
Button
[
SELECT
]
Knob
Multi-Display Window
[
MONI
]
Button
Transmitting in the Beacon Mode
It is possible to transmit repetitively in a “Beacon” mode, any message programmed either via paddle input or via
the “Text” input method. The time delay between message repeats may be set anywhere between 1 and 255 seconds
via Menu item “016 KEY BEACON”. If you do not wish the message to repeat in a “Beacon” mode, please set this
Menu item to “OFF”.
To transmit the message:
1. Press and hold the
[
SELECT
]
knob for two sec-
onds to activate the Contest Memory Keyer. You
will see one of following indication in Multi-Dis-
play Window on the display; “rEC1”, “rEC2”,
“rEC3”, “rEC4”, “rEC5”, “PLY1”, “PLY2”,
“PLY3”, “PLY4”, or “PLY5”.
2. Rotate the
[
SELECT
]
knob to select the CW
Memory Register (“PLY1”
through “PLY5”) where the Bea-
con message is stored.
3. Press the
[
SELECT
]
knob momentarily. Repeti-
tive transmission of the Beacon message will be-
gin. Press the
[
SELECT
]
knob once more to halt
the Beacon transmissions.
NOTE:
Adjust the sidetone monitor level using the
[
MONI
]
knob.
NOTE:
If you subsequently decide to use the “Text Memory” tech-
nique for memory storage, please note that the contents of
a message stored using keyer paddle input will not be trans-
ferred over when you select “Text Memory technique” on
a particular memory register (the Menu Mode Setting is
set to “tyP1”).
[
BK-IN
]
Button
[
SELECT
]
Knob
Multi-Display Window
[
MONI
]
Button
[
SELECT
]
Knob
Multi-Display Window
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info