478504
79
Zoom out
Zoom in
Previous page
1/132
Next page
Page 77FT-950 OPERATING MANUAL
CW DELAY TIME SETTING
During semi-break-in (not QSK) operation, the hang time of the transmitter, after you have finished sending, may be
adjusted to a comfortable value consistent with your sending speed. This is the functional equivalent of the “VOX Delay”
adjustment used on voice modes, and the delay may be varied anywhere between 30 msec and 3 seconds via Menu item
044 A1A DELAY”.
1. Press the
[
BK-IN
]
button to enable CW transmission
(Menu item “043 A1A BK-IN” must be set to “SEni”).
2. Press the
[
MENU
]
button to enter the Menu mode.
3. Rotate the
[
SELECT
]
knob to select Menu item “044
A1A DELAY”.
ADVICE:
Press the
[
SELECT
]
knob momentarily to toggle the
Menu item display between “044 A1A” and “DELAY”.
4. Start sending and rotate the
[
CLAR/VFO-B
]
knob to
adjust the hang time, as you prefer for comfortable
operation.
5. When you are finished, press and hold in the
[
MENU
]
button for one second to save the new setting and exit
to normal operation.
CW PITCH ADJUSTMENT
You may adjust the center frequency of the receiver passband, and change the pitch of your offset CW carrier, to the tone
you prefer via the Menu item “045 A1A PITCH”. The tone may be varied between 300 Hz and 1050 Hz, in 50 Hz steps.
1. Press the
[
MENU
]
button to enter the Menu mode.
2. Rotate the
[
SELECT
]
knob to select Menu item “045
A1A PITCH”.
ADVICE:
Press the
[
SELECT
]
knob momentarily to toggle the
Menu item display between “045 A1A” and “PITCH”.
3. Rotate the
[
CLAR/VFO-B
]
knob to select the desired
tone.
4. When you are finished, press and hold in the
[
MENU
]
button for one second to save the new setting and exit
to normal operation.
ADVICE:
You may confirm the Spot tone frequency by pressing the
[
SPOT
]
button. The frequency display will show the Spot
tone frequency.
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
[
BK-IN
]
Button
TERMINOLOGY:
CW Pitch: If you tuned to an exact “zero beat” on an in-
coming CW signal, you could not copy it (“Zero beat”
implies a 0 Hz tone). Therefore, the receiver is offset sev-
eral hundreds of Hz (typically), to allow your ear to detect
the tone. The BFO offset associated with this tuning (that
produces the comfortable audio tone) is called the CW
Pitch.
CW CONVENIENCE FEATURES
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info