478504
41
Zoom out
Zoom in
Previous page
1/132
Next page
Page 39FT-950 OPERATING MANUAL
MORE FREQUENCY NAVIGATION TECHNIQUES
Keyboard Frequency Entry
You may enter operating frequencies directly into the cur-
rent VFO, using the front panel
[
BAND
]
key buttons.
Example: Enter 14.250.00 MHz
1. Press the
[
ENT
]
button to
engage the direct frequency
entry process. Now, begin-
ning with the first digit of
the frequency (the leftmost
digit), we will enter the required digits of the frequency.
2. Press, in order, the digits of the operating frequency,
using the
[
BAND
]
buttons (the frequency entry digit
or decimal point is printed on the right side of the but-
tons). In this example, enter
[
1.8
(
1
)]
[
10
(
4
)]
[
GEN
(
.
)]
[
3.5
(
2
)]
[
14
(
5
)]
[
50
(
0
)]
[
50
(
0
)]
[
50
(
0
)]
[
50
(
0
)]
The decimal point after the “MHz” portion of the fre-
quency must be entered, but no decimal point is re-
quired after the “kHz” portion.
3. Press the
[
ENT
]
button once more. A short “beep” will
confirm that the frequency entry was successful, and
the new operating frequency will appear on the dis-
play.
ADVICE:
If you attempt to enter a frequency outside the operat-
ing range of 30 kHz ~ 56 MHz, the microprocessor
will ignore the attempt, and you will be returned to
your previous operating frequency. If this happens,
please try again, taking care not to repeat the error in
the frequency entry process.
Using the
[
CLAR/VFO-B
]
knob
You may change the current VFO frequency in 1 MHz
steps. Press the
[
MHz
]
button
located at the bottom and left
of the
[
CLAR/VFO-B
]
knob.
The 1 MHz steps will be ap-
plied to the current VFO fre-
quency. The imbedded LED
in the
[
MHz
]
button will glow
orange in the latter case.
When tuning in 1 MHz steps,
clockwise rotation of the
[
CLAR/VFO-B
]
knob will increase the frequency, while
counter-clockwise rotation will decrease the frequency.
Using the
[
UP
]
/
[
DWN
]
buttons of the
supplied MH-31B8 Hand Microphone
The
[
UP
]
/
[
DWN
]
buttons on the
supplied MH-31
B8 Hand Micro-
phone may also be used to
manually scan the frequency up-
ward or downward.
The microphone’s
[
UP
]
/
[
DWN
]
buttons utilize the tuning steps of
the Main Tuning Dial knob. When
the microphone’s
[
FST
]
button is
pressed, the tuning rate increases by a
factor of ten, in a manner similar to the
transceiver front panel
[
FST
]
button.
ADVICE:
You may independently set the tuning
steps of the
[
UP
]
/
[
DWN
]
buttons in the AM and FM
modes. To set new tuning steps, use Menu items “087
TUN AM STEP” and “088 TUN FM STEP”.
CONVENIENCE FEATURES
DYNAMIC MICROPHONE
MH-31
DWN FST UP
[
DWN
]
Button
[
FST
]
Button
[
UP
]
Button
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info