478504
34
Zoom out
Zoom in
Previous page
1/132
Next page
Page 32 FT-950 OPERATING MANUAL
OPERATION ON 60-METER
(
5 MHZ
)
BAND
(
U.S.
AND U.K. VERSION ONLY
)
The recently-released 60-meter band is covered, in the FT-950, by fixed memory channels. These channels are set to USB,
and they appear between the “last” PMS channel (“P9U”) and the first “regular” memory channel (Channel 1):
1. Press the
[
V/M
]
button once to enter the “Memory”
mode; the “ ” icon will appear in the display and a
memory channel number will appear on the Multi-Dis-
play Window in the display.
ADVICE:
If you can not enter the “Memory” mode, check to see
if the transceiver is in VFO-B mode (the green
[(
VFO-
B
)
RX
]
Indicator/Switch is illuminated). If so, press the
[(
VFO-A
)
RX
]
Indicator/Switch to return operation to
VFO-A. Now, press the
[
V/M
]
button to enter the
“Memory” mode.
2. Press the
[
MCH
]
button located on the bottom right of
the
[
CLAR/VFO-B
]
knob. The LED imbedded in the
button will glow orange to signify that rotation of the
[
CLAR/VFO-B
]
knob will allow selection of the
memory channel.
3. Memory channels (“US1” through “US5”: U.S. ver-
sion or “US1” through “US7”: U.K. version) are pre-
programmed, at the factory, with the permitted frequen-
cies in the 5 MHz band, and the USB mode is auto-
matically selected on these channels.
4. To exit from 60-meter operation and return to the VFO
mode, just press the
[
V/M
]
button.
NOTE:
The frequencies and operating mode for 5 MHz band op-
eration are fixed, and may not be changed.
BASIC OPERATION:RECEIVING ON AMATEUR BANDS
[
CLAR/VFO-B
]
Knob
[
VFO-B
(
RX
)]
Button
[
MCH
]
Button
[
V/M
]
Button
[
VFO-A
(
RX
)]
Button
Main Tuning Dial Knob
CHANNEL
NUMBER
US1
US2
US3
US4
US5
US6
US7
U.S. VERSION
5.332000 MHz
5.348000 MHz
5.368000 MHz
5.373000 MHz
5.405000 MHz
U.K. VERSION
5.260000 MHz
5.280000 MHz
5.290000 MHz
5.368000 MHz
5.373000 MHz
5.400000 MHz
5.405000 MHz
FREQUENCY
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info