478504
33
Zoom out
Zoom in
Previous page
1/132
Next page
Page 31FT-950 OPERATING MANUAL
8. Press the appropriate
[
MODE
]
button to select the de-
sired operating mode.
Pressing the
[
SSB
]
button toggles the
LSB and USB mode, and also pressing the
[
AM/FM
]
button toggles the AM and FM
mode.
ADVICE:
By convention in the Amateur bands, LSB is used
on the 7 MHz and lower bands (with the exception
of 60 meters), while USB is utilized on the 14 MHz
and higher bands.
When changing modes from SSB to CW, you will
observe a frequency shift on the display. This shift
represents the BFO offset between the “zero beat”
frequency and the audible CW pitch (tone) you can
hear (the pitch is programmed via the Menu item
045 A1A PITCH”), even though the actual tone
that you hear is not changing. If you do not want
this frequency shift to appear when changing modes
from (for example) USB to CW, use the Menu item
047 A1A FRQDISP”, described on page 112.
When operating on the FM mode, rotate the
[
SQL
]
(Squelch) knob clockwise to the point where the
background noise is just silenced. This is the point
of maximum sensitivity to weak signals. Excessive
advancement of the
[
SQL
]
knob will degrade the
ability of the receiver to detect weak signals.
9. Rotate the Main Tuning Dial knob to tune around the
band, and begin normal operation.
BASIC OPERATION:RECEIVING ON AMATEUR BANDS
ADVICE:
Clockwise rotation of the Main Tuning Dial knob
increases the operating frequency, one “step” of the
synthesizer at a time; similarly, counter-clockwise
rotation of the Main Tuning Dial knob will decrease
the frequency. Two settings, one “normal” and one
“fast”, are available on each operating mode. Press-
ing the
[
FAST
]
button engages the “Fast” tuning
selection, see chart below.
It is possible to set the frequency change over one
dial rotation, separately for the CW mode, using
the Menu items “084 TUN DIALSTP” and “085
TUN CW FINE”. See page 116.
If you want to navigate rapidly, so as to effect rapid
frequency change, there are several techniques
available:
Direct keyboard entry of the frequency (see page
39).
Use the
[
CLAR/VFO-B
]
knob to tune in 1 MHz
steps (see page 39).
Use the microphone’s
[
UP
]
/
[
DWN
]
scanning
keys, if your microphone is so equipped (see
page 39).
MAIN TUNING DIAL KNOB TUNING RATE
OPERATING MODE 1 STEP 1 DIAL ROTATION
NORMAL
[
FAST
]
N
ORMAL
[
FAST
]
LSB/USB/CW/AM/ 10 Hz 10 kHz
RTTY/PKT
(
LSB
)[
100 Hz
][
100 kHz
]
FM/PKT
(
FM
)
100 Hz
[
1 kHz
]
100 kHz
[
1 MHz
]
[
]
:
[
FAST
]
switch set to “ON”
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info