36023

Yaesu ft-897D Manual

35
Zoom out
Zoom in
Previous page
1/76
Next page
Page 33FT-897D OPERATING MANUAL
Using the Built-in Electronic Keyer
TRANSMITTER OPERATION
6. The Dot:Dash weighting ratio may be adjusted via Menu
Mode. To adjust the Dot:Dash weighting ratio:
• Press and hold in the
[
F
]
key for one second to enter
the Menu mode.
• Rotate the MEM/VFO CH knob to select Menu Mode
No-032
[
CW WEIGHT
]
.
• Rotate the DIAL knob to set the desired weight.
• When done, press and hold in the
[
F
]
key for one
second to save the new setting and exit to normal
operation.
The built-in Electronic Keyer provides a convenient method
of generating CW. The Electronic Keyer includes weight
and speed adjustments.
1. Connect your keyer paddle’s cable to the KEY jack on
the rear panel of the transceiver.
2. Press the MODE
(
)
or MODE
(
)
key, as needed, to
select the desired CW mode (CW/CWR).
3. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row “j”
[
SPOT, BK, KYR
]
appears on the display.
4. Press the
[
C
](
KYR
)
key to activate the Electronic Keyer.
“Parentheses” will appear on both sides of the “KYR”
indication. Closing the contacts on your keyer paddle
will now cause CW dots and/or dashes to be generated.
5. The keyer speed may be adjusted using the Menu Mode.
To adjust the Keyer speed:
• While still in Multi Function Row “j”
[
SPOT, BK,
KYR
]
, press and hold in the
[
C
](
KYR
)
key for one
second. This is a “hot key” feature which will in-
stantly recall Menu Mode No-030
[
CW SPEED
]
.
• Press the MEM/VFO CH knob if you wish to select
display of “cpm” (characters per minute) instead of
“wpm” (words per minute). The “cpm” selection is
based on the international “PARIS” standard, which
stipulates five characters per word.
• Rotate the DIAL knob, while sending, to set the de-
sired sending speed.
• When done, press and hold in the
[
F
]
key for one
second to save the new setting and exit to normal
operation.
CW TRANSMISSION
7. You may select “normal” or “reverse” paddle polarity
via Menu Mode No-025
[
CW KEY REV
]
. The default
setting for this feature is “NORMAL,” whereby the “Tip”
connection on the Key Plug is “Dot” and the “Ring” con-
nection is “Dash.” To change the paddle polarity:
• Press and hold in the
[
F
]
key for one second to enter
the Menu mode.
• Rotate the MEM/VFO CH knob to select Menu Mode
No-025
[
CW KEY REV
]
.
• Rotate the DIAL knob to select the new setting.
• When done, press and hold in the
[
F
]
key for one
second to save the new setting and exit to normal
operation.
Dot : Dash = 1 3 (default) :
Dot : Dash = 1 : 4.4
Dash : 3
Dot : 1
C
Q
Dash : 4.4
Dot : 1
C
Q
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu ft-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu ft-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info