36023
30
Zoom out
Zoom in
Previous page
1/76
Next page
Page 28 FT-897D OPERATING MANUAL
AM/FM TUNING DIAL OPERATION
In the AM and FM modes, the DIAL knob is locked out (via
the setting of Menu Mode No-004
[
AM&FM DIAL
]
) so as
to allow “channelized” tuning on these modes. To adjust the
operating frequency, simply rotate the MEM/VFO CH knob.
If you wish to enable the DIAL for tuning in the AM and FM
modes, change the setting of Menu Mode No-004
[
AM&FM
DIAL
]
. See page 56 for details.
The “channelized” mode of tuning on AM and
FM automatically rounds off the frequency to
the next “logical” step when you rotate the
MEM/VFO CH knob one “click” in either direction. This
eliminates the inconvenience of having to preset the fre-
quency to an “even” channel.
RECEIVER ACCESSORIES
AUTOMATIC POWER-OFF FEATURE
The APO feature helps conserve battery life by automati-
cally turning the transceiver off after a user-defined period
of time within which there has been no dial or key activity.
The available selections for the time before power-off are 1
~ 6 hours, as well as “APO Off.” The default condition for
the APO is OFF, and here is the procedure for activating it:
1. Press and hold the
[
F
]
key for one second to enter the
Menu mode.
2. Rotate the MEM/VFO CH knob to recall Menu Mode
No-007
[
APO TIME
]
.
3. Rotate the DIAL knob to select the desired time period
after which the radio will automatically shut down.
4. Press and hold in the
[
F
]
key for one second to save the
new setting and exit to normal operation.
Once you have programmed a time interval, the APO count-
down timer will start whenever some front panel action (tun-
ing, transmission, etc.) is completed.
When the APO is activated, the “ ” icon will appear at the
center top on the LCD. If there is no action by you within
the time interval programmed, the microprocessor will shut
down the radio automatically.
Just press and hold in the POWER switch for one second to
turn the transceiver back on after an APO shutdown, as usual.
The APO feature will be disabled while using
the Beacon or ARTS features, even if the APO
feature is set to “ON.”
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu ft-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu ft-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info