36023

Yaesu ft-897D Manual

22
Zoom out
Zoom in
Previous page
1/76
Next page
Page 20 FT-897D OPERATING MANUAL
Hi! I’m R.F. Radio, and I’m here to guide you
through the fine points of the setup and use of
your new FT-897D. I know you’re anxious to
get on the air, but I encourage you to read the “Opera-
tion” section of this manual as thoroughly as possible, so
you’ll get the most out of this fantastic new rig. Now. .
.let’s get operating!
TURNING THE TRANSCEIVER ON AND OFF
❒
To turn the transceiver on, press and hold in the POWER
switch for one second.
❒
To turn the transceiver off, again press and hold in the
POWER switch for one second.
OPERATION
When you are operating the FT-897D with the
optional FP-30 External power supply, always
turn on the MAIN switch on the FP-30 before
turning on the POWER switch on the FT-897D. When shut-
ting down, please turn off the POWER switch on the FT-
897D before turning off the MAIN switch on the FP-30.
OPERATING BAND SELECTION
This transceiver covers an incredibly wide frequency range,
over which a number of different operating modes are used.
Therefore, this transceiver’s frequency coverage has been
divided into different operating bands, each of with has its
own pre-set frequency steps and operating modes. You can
change the channel steps and operating mode once you get
started, of course, per the next section.
To change the frequency band, press either the
BAND
(
DWN
)
or BAND
(
UP
)
key to move to the next lower
or higher operating band, respectively.
1) Recalling the 5 MHz band (U.S. model) re-
quires different procedure. See page 23 for de-
tails.
2)VFOa and VFOb are independent VFOs, so they may
be set to different bands. See the “Stacked VFO System”
discussion on page 22 for details.
1. Press and hold in the
[
F
]
key for one second to enter
the Menu mode.
2. Rotate the MEM/VFO CH knob to recall the Menu
Item to be changed (for example, Menu Mode No-001
[
EXT MENU
]
, which Enables or Disables the “Extended
Menu” Mode).
3. Rotate the DIAL knob to set this feature (in this ex-
ample, the default setting is “OFF (Disabled),” so ro-
tate the DIAL knob to set this feature to “ON” (En-
abled).
4. Press and hold in the
[
F
]
key for one second to save
the new setting and exit to normal operation.
If you have momentarily pressed the
[
F
]
key
to enable the changing of the function of the
Multi Function keys
([
A
]
,
[
B
]
, and
[
C
])
by
the MEM/VFO CH knob.
BATT- B
BATT- A
POWER
BATT-B
BATT-A
BAND
BATT-B
BATT-A
FDIAL
MEM/VFO CH
1.8 MHz
108 MHz
18 MHz
21 MHz
3.5 MHz
7 MHz
5 MHz
50 MHz
14 MHz
24.5 MHz
10 MHz
28 MHz144 MHz
88 MHz
15 MHz
430 MHz
BAND
UP
LCD Contrast
If you experience difficulty in reading the main display,
try adjusting the LCD’s contrast, using the Menu mode.
1. Press and hold in the
[
F
]
button for one second to
activate the Menu mode.
2. Rotate the MEM/VFO CH knob to select Menu
Mode No-042
[
DISP CONTRAST
]
.
3. Rotate the DIAL knob to adjust the contrast. As you
make the adjustment, you will be able to see the ef-
fects of you changes.
4. When you have completed the adjustment, press and
hold in the
[
F
]
button for one second to exit the Menu
mode.
Menu Quick Start
Many aspects of this transceiver’s configuration may be customized using the convenient “Menu” system, which allow you
to configure many “set and forget” settings just the way you want to. A full discussion of the Menu system begins on page
54; for now, here is a brief discussion on how to change Menu settings:
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu ft-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu ft-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info