36023
14
Zoom out
Zoom in
Previous page
1/76
Next page
Page 12 FT-897D OPERATING MANUAL
Liquid Crystal Display
The Liquid Crystal Display (LCD) provides indication
of the operating frequency and other aspects of trans-
ceiver status.
FUNC Keys
These three keys select many of the most important op-
erating features of the transceiver. When you press the
[
F
]
key, then rotate the MEM/VFO CH knob, the cur-
rent function of that key will appear above each of the
[
A
]
,
[
B
]
, and
[
C
]
keys (along the bottom of the LCD).
You may scroll the display through 17 rows of functions
available for use via the
[
A
]
,
[
B
]
, and
[
C
]
keys.
The available features are shown in page 14.
MIC Jack
Connect the supplied MH-31A8J Hand Microphone to
this jack.
[
F
]
Key
Press this key momentarily to enable the changing of the
function of the Multi Function keys (
[
A
]
,
[
B
]
, and
[
C
]
)
by the MEM/VFO CH knob.
Press and hold this key for one second to activate the
“Menu” mode.
LOCK Key
Pressing this key locks the front panel keys so as to pre-
vent accidental frequency change. The LOCK key it-
self, though, will never be disabled.
MAIN DIAL
This is the main tuning dial for the transceiver. It is used
both for frequency tuning as well as “Menu” setting in
the transceiver.
AF Knob
The (inner) VOL knob adjusts the receiver audio vol-
ume level presented to the internal or external speaker.
Clockwise rotation increases the volume level.
SQL/RF Knob
In the USA version, this (outer) SQL/RF knob adjusts
the gain of the receivers RF and IF stages. Using Menu
Mode No-080
[
SQL/RF GAIN
]
, this control may be
changed to function as a Squelch control, which may be
used to silence background noise when no signal is
present. In the other versions, its default setting is set to
“Squelch.”
CLAR/IF SHIFT Key
Pressing this key activates the Receiver Clarifier fea-
ture. When this feature is activated, the CLAR knob is
used to set a tuning offset of up to ±9.99 kHz. The
transmitters frequency is not affected by the setting of
the Clarifier.
Press and hold this key for one second to activate the IF
Shift feature, which allows you to use the MEM/VFO
CH knob to adjust the center frequency of the IF filters
passband response.
FRONT PANEL CONTROL & SWITCHES
BATT-B
BATT-A
FAST
GND
PTT
MICMIC GN
D
+5 V
UP
DOWN
PHONES Jack
This 1/4-inch, 3-contact jack accepts either monaural or
stereo headphones with 2- or 3-contact plugs. When a
plug is inserted, the loudspeaker is disabled. The audio
level varies according to the setting of the front panel’s
AF knob.
POWER Switch
Press and hold in the POWER switch for one second to
turn to the transceiver on or off.
While the transceiver is turned on, pressing this switch
momentarily will engage the “Fast Tuning” mode, to al-
low more rapid frequency navigation (a small “running
man” icon will be observed in the bottom right-hand
corner of the LCD).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu ft-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu ft-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info