35966
62
Zoom out
Zoom in
Previous page
1/72
Next page
Page 60 FT-897 OPERATING MANUAL
MENU MODE No-080
[
SQL/RF GAIN
]
Function: Selects the configuration of the front panel’s SQL/
RF knob.
Available Values: RF-GAIN/SQL
Default: Depends on transceiver version.
MENU MODE No-081
[
SSB MIC GAIN
]
Function: Adjusts the microphone gain level for the SSB
mode.
Available Values: 0 ~ 100
Default: 50
MENU MODE No-082
[
SSB STEP
]
Function: Selects the tuning steps for the MEM/VFO CH
knob on the SSB mode.
Available Values: 1kHz/2.5kHz/5kHz
Default: 2.5kHz
MENU MODE No-083
[
TONE FREQ
]
Function: Setting of the CTCSS Tone Frequency.
Available Values: 50 Standard CTCSS tones
Default: 88.5 Hz
MENU MODE No-084
[
TOT TIME
]
Function: Select the Automatic Power Off time.
Available Values: OFF/1 ~ 20 (min)
Default: OFF
MENU MODE No085
[
TUNER/ATAS
]
Function: Selects the device (FC-30 or ATAS-100/-120)
to be controlled via the front panel’s
[
A
](
TUNE
)
key.
Available Values: OFF/ATAS(HF)/ATAS(HF&50)/
ATAS(ALL)/TUNER
Default: OFF
OFF: The
[
A
](
TUNE
)
key is disabled.
ATAS
(
HF
)
: The
[
A
](
TUNE
)
key will activate the op-
tional ATAS-100/-120 on the HF amateur
bands.
ATAS
(
HF&50
)
:The
[
A
](
TUNE
)
key will activate the op-
tional ATAS-100/-120 on the HF amateur
bands and 50 MHz amateur band.
ATAS
(
ALL
)
: The
[
A
](
TUNE
)
key will activate the op-
tional ATAS-100/-120 on the all amateur
bands which enable to the FT-897 trans-
ceiver.
TUNER: The
[
A
](
TUNE
)
key will activate the op-
tional FC-30.
MENU OPERATION
MENU MODE No086
[
TX IF FILTER
]
Function: Selects the Transmit IF filter.
Available Values: CFIL/FIL1/FIL2
Default: CFIL
MENU MODE No087
[
VOX DELAY
]
Function: Sets the “hang time” for the VOX circuitry.
Available Values: 100 ~ 3000 (ms)
Default: 500 (ms)
MENU MODE No-088
[
VOX GAIN
]
Function: Sets the gain of the VOX circuitry’s input audio
detector.
Available Values: 1 ~ 100
Default: 50
MENU MODE No089
[
XVTR A FREQ
]
Function: Allows an arbitrary frequency to be set on the
display, to allow direct frequency readout during transverter
operation; can also be used to account for frequency con-
version inaccuracies when a known reference frequency is
known.
Available Values: 00,000,00 ~ 99,999,99 (kHz)
Default: Current VFO frequency.
MENU MODE No090
[
XVTR B FREQ
]
Function: Allows an arbitrary frequency to be set on the
display, to allow direct frequency readout during transverter
operation; can also be used to account for frequency con-
version inaccuracies when a known reference frequency is
known.
Available Values: 00,000,00 ~ 99,999,99 (kHz)
Default: Current VFO frequency.
MENU MODE No091
[
XVTR SEL
]
Function: Enable/disable the Transverter function.
Available Values: OFF/XVTR A/XVTR B
Default: OFF
OFF: Disables the Transverter operation feature.
X VTR A: Activates the transverter operation feature.
The display frequency may be set via MENU No-
089
[
XVTR A FREQ
]
.
X VTR B: Activates the second transverter operation display.
The display frequency may be set via MENU No-
090
[
XVTR B FREQ
]
.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-897

Yaesu FT-897 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info