35966
61
Zoom out
Zoom in
Previous page
1/72
Next page
Page 59FT-897 OPERATING MANUAL
MENU MODE No061
[
MTR ATX SEL
]
Function: Selects the meter display configuration while the
transceiver is transmitting.
Available Values: PWR, ALC, MOD, SWR, VLT, N/A, OFF
Default: PWR
PWR: Indicates the relative transmit power.
ALC: Indicates the relative Automatic Level Control voltage.
MOD: Indicates the deviation level.
SWR:Indicates the Standing Wave Ratio
(forward:reflected).
VLT: Indicates the battery voltage.
N/A: Not available at this time.
OFF: Disables the meter.
MENU MODE No-062
[
MTR PEAK HOLD
]
Function: Enabling/disabling of the “peak hold” function
of the meter.
Available Values: OFF/ON
Default: ON
MENU MODE No-063
[
NB LEVEL
]
Function: Setting of the blanking level for the IF Noise
Blanker.
Available Values: 0 ~ 100
Default: 50
MENU MODE No064
[
OP FILTER 1
]
Not available at this time.
MENU MODE No065
[
PG A
]
Function: Programming the [A] key (in the Operating Func-
tion Row 17) function.
Available Values: All Multi Function , all Menu Item,
MONI, Q.SPL, TCALL, ATC and USER.
Default: MONI
MENU MODE No066
[
PG B
]
Function: Programming the [B] key (in the Operating Func-
tion Row 17) function.
Available Values: All Multi Function , all Menu Item,
MONI, Q.SPL, TCALL, ATC and USER.
Default: Q.SPL
MENU MODE No067
[
PG C
]
Function: Programming the [C] key (in the Operating Func-
tion Row 17) function.
Available Values: All Multi Function , all Menu Item,
MONI, Q.SPL, TCALL, ATC and USER.
Default: ATC
MENU MODE No068
[
PG ACC
]
Not available at this time.
MENU MODE No069
[
PG P1
]
Not available at this time.
MENU MODE No070
[
PG P2
]
Not available at this time.
MENU MODE No071
[
PKT1200
]
Function: Adjusts the audio input level from the TNC dur-
ing 1200 bps Packet operation.
Available Values: 0 ~ 100
Default: 50
MENU MODE No072
[
PKT9600
]
Function: Adjusts the audio input level from the TNC dur-
ing 9600 bps Packet operation.
Available Values: 0 ~ 100
Default: 50
MENU MODE No073
[
PKT RATE
]
Function: Sets the transceivers circuitry for the Packet baud
rate to be used.
Available Values: 1200/9600 (bps)
Default: 1200 (bps)
MENU MODE No-074
[
PROC LEVEL
]
Function: Sets the compression level for the AF speech pro-
cessor in the SSB/AM modes.
Available Values: 0 ~ 100
Default: 50
MENU MODE No-075
[
RF POWER SET
]
Function: Setting of the maximum power level for the cur-
rent band.
Available Values: 5 ~ 100
Default: 100
MENU MODE No-076
[
RPT SHIFT
]
Function: Sets the magnitude of the repeater shift.
Available Values: 0.00 ~ 99.99 (MHz)
Default: Depends on operating band and transceiver ver-
sion.
MENU MODE No077
[
SCAN MODE
]
Function: Selects the desired Scan-Resume mode.
Available Values: TIME/BUSY/STOP
Default: TIME
This Menu Item allows you to select your favorite method
of scan-restart after the scanner has stopped on an incoming
signal (when the squelch opens).
TIME: The scanner will hold for a fixed length of time, set
via MENU MODE No-078
[
SCAN RESUME
]
, then
resume whether or not the other station is still trans-
mitting.
BUSY: The scanner will hold until the signal disappears, then
will resume after one second.
STOP:The scanner will stop when a signal is received, and
will not restart.
MENU MODE No078
[
SCAN RESUME
]
Function: Sets the delay time for scanning resumption.
Available Values: 1 ~ 10 (sec)
Default: 5
MENU MODE No079
[
SPLIT TONE
]
Function: Enables/disables split CTCSS/DCS cording.
Available Values: OFF/ON
Default: OFF
MENU OPERATION
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-897

Yaesu FT-897 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info