478467
52
Zoom out
Zoom in
Previous page
1/72
Next page
50 FT-8800R Operating Manual
The FT-8800R can be used to access the repeater which is configured to provide access to
the Vertex Standard WIRES
TM
(Wide-Coverage Internet Repeater Enhancement System).
1. Press the “leftVOL knob momentarily to activate the WIRES™ access capability. The
INT ONINT ON
INT ONINT ON
INT ON” will appear for 2 seconds at the “Main” band frequency display. The “
intint
intint
int
icon will appear in the memory channel field on the “Sub” band while WIRES
TM
access
is enabled.
2. Rotate the “Main” band DIAL knob, while pressing and holding in the “leftVOL knob,
to select the access number (
ICODE ICODE
ICODE ICODE
ICODE
00
00
0” ~ “
99
99
9,” “
AA
AA
A,” “
BB
BB
B,” “
CC
CC
C,” “
DD
DD
D,” “
E E
E E
E (),” or “
F F
F F
F (#)”)
corresponding to the WIRES
TM
repeater to which you wish to establish an Internet link
(ask your repeater owner/operator if you don’t know the access numbers in the net-
work).
3. With the WIRES™ capability activated (as in step 1 above), the FT-8800R will gener-
ate a brief (0.1 second) DTMF tone according to your selection in step 2. This DTMF
tone is sent at the beginning of every transmission to establish or maintain the link to the
remote WIRES
TM
repeater.
4. To disable the WIRES
TM
access capability, press the “leftVOL knob again.
You may access other Internet Link Systems that use a DTMF string for access.
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #15 (
DTMF WDTMF W
DTMF WDTMF W
DTMF W).
3. Press the “Main” band DIAL knob momentarily, then load the DTMF tones which you
wish to use to establish an Internet link (ask your repeater owner/operator if you don’t
know the access numbers in the network) into the desired DTMF Memory channel.
1) Rotate the “Main” band DIAL knob to select the DTMF Autodialer memory channel
number (“
d-1d-1
d-1d-1
d-1” through “
d-16d-16
d-16d-16
d-16”).
2) Press the “Main” band DIAL knob momentarily.
3) Rotate the “Main” band DIAL knob to select the DTMF code, then press the “Main
band DIAL knob momentarily to move the digit.
4) Repeat step 3) above.
5) Press the “Main” band DIAL knob momentarily to save the new setting.
4. Rotate the “Main” band DIAL knob to select Menu #17 (
INETINET
INETINET
INET).
5. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to set this Item to “
INT.MEMINT.MEM
INT.MEMINT.MEM
INT.MEM” (to enable the alternative Internet Link, and disable
the WIRES™ access option).
6. Press and hold in the “Main” band DIAL knob for 1/2 second to save the new setting
and exit to normal operation.
7. Press the “leftVOL knob momentarily to activate the Internet Link System. The “
INTINT
INTINT
INT
ONON
ONON
ON” display will appear for 2 seconds in the “Main” band frequency field. The “
intint
intint
int
icon will then appear in the memory channel field on the “Sub” band while the Internet
Link System access feature is engaged.
INTERNET CONNECTION FEATURE
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info