478467
50
Zoom out
Zoom in
Previous page
1/72
Next page
48 FT-8800R Operating Manual
Sixteen DTMF Autodialer memories are available on the FT-8800R. These DTMF
Autodialer memories can store up to 16 digits of a telephone number for repeater autopatch
or other uses.
To load DTMF Autodialer memories, use following procedure:
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #15 (
DTMF WDTMF W
DTMF WDTMF W
DTMF W).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to select the DTMF Autodialer memory channel number (“
d-1d-1
d-1d-1
d-1” through “
d-16d-16
d-16d-16
d-16”)
into which you wish store a telephone number.
4. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to select the first digit of the telephone number you wish to store.
5. When you have selected the correct digit, press the “Main” band DIAL knob momen-
tarily. Now, rotate the “Main” band DIAL knob to select the second of the 16 available
numbers in this current DTMF Audodialer memory register.
6. Repeat this procedure for each digit in the telephone number. Press the “Main
band
[
SCN
]
key momentarily to delete any previously-stored data after the cursor. If you
make a mistake, press the microphone’s
[
DWN
]
key to move back to the first digit, then
re-enter the correct number.
7. When entry of all digits is complete, press the
[
SET
]
key momentarily to save the new
setting.
8. If you wish to store another DTMF string, rotate the “Main” band DIAL knob to select
another DTMF memory register, then repeat steps 4 through 7 above.
9. When all required DTMF memories are filled to your satisfaction, press and hold in the
Main” band DIAL knob for 1/2 second to exit to normal operation.
To transmit the memorized telephone number, use the following procedure:
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #15 (
DTMF WDTMF W
DTMF WDTMF W
DTMF W).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to select the DTMF Autodialer memory channel to be transmitted.
4. Press and hold in the “Main” band DIAL knob for 1/2 second to exit to normal opera-
tion.
5. Press the PTT switch.
6. While still holding the PTT switch in, press the “Main” band
[
HM
]
key momentarily to
transmit the tone string.
Once you have pressed the
[
HM
]
key in the above step, you can release the PTT switch, as
the Autodialer will transmit the whole DTMF string automatically.
DTMF AUTODIALER OPERATION
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info