478467
36
Zoom out
Zoom in
Previous page
1/72
Next page
34 FT-8800R Operating Manual
Memory Recall
1. While operating in the VFO mode, press the
[
V/M
]
key momentarily to enter the Memory
mode.
2. Rotate the DIAL knob to select the desired channel.
3. To return to the VFO mode, press the
[
V/M
]
key momentarily again.
When the radio is already set to the Memory mode, an easy way to recall memories
is to enter the microphone’s key in the memory channel number. For example, to
recall memory channel #4, press
[
0
]
[
0
]
[
4
]
.
Memory Offset Tuning
Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the “VFO” mode.
1. With the FT-8800R in the “MR” (Memory Recall) mode, select the desired memory
channel.
2. Now press and hold in the
[
SCN
]
key for 1/2 second; the “MT” icon will appear on the
display.
3. Rotate the DIAL knob, as desired, to tune to a new frequency. The synthesizer steps
selected for VFO operation on the current band will be the steps used during Memory
Tuning.
4. Press and hold in the
[
V/M
]
key for 1/2 second during Memory Tuning, the data will
now have been copied to VFO, although the original memory contents will remain
intact on the previously-stored channel.
5. If you wish to return to the original memory frequency, press the
[
V/M
]
key momen-
tarily. The MT” icon will disappear.
Deleting Memories
With 1052 memories available (except memory channel “1”), there frequently are situa-
tions where you may desire to delete certain memorized frequencies. The procedure for
deleting a channel is quite simple:
1. Press the
[
V/M
]
key, if needed, to enter the Memory mode.
2. Press and hold in the
[
SET
]
key for 1/2 second, then rotate the “Main” band DIAL knob
to select the memory channel to be deleted. Note that memory channel #1 may not be
deleted.
3. Press the “Main
band [
SCN
]
key momentarily. The display will revert to memory
channel #1. If you rotate the “Main” band DIAL knob to the location you just “Masked,”
you will observe that it is now invisible.
Note: Once deleted, the channel data cannot be recovered.
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info