478467

Yaesu FT-8800R Manual

35
Zoom out
Zoom in
Previous page
1/72
Next page
33FT-8800R Operating Manual
To Append an Alpha-numeric “Tag” to a Memory
1. After pressing and holding in the
[
SET
]
key in step 4 above, rotate the “Main” band
DIAL knob to select the first character in the name you wish to store, the press the
“Main” band DIAL knob momentarily to move on to the next character. Letters, num-
bers, and symbols are available for storage.
2. Again rotate the “Main” band DIAL knob to select the desired letter, number, or sym-
bol, then press the “Main” band DIAL knob momentarily to move on to the next
character’s slot. If you make a mistake, press the microphone’s
[
DWN
]
button to move
back to the previous character’s slot, then re-select the correct letter, number, or symbol.
3. Repeat the above step to program the remaining letters, numbers, or symbols of the
desired label. A total of six characters may be used in the creation of a label.
4. When you have completed the creation of the label, press the
[
SET
]
key momentarily to
save the label and exit to normal operation.
Storing Independent Transmit Frequencies (“Odd Splits”)
1. Store the receiving frequency using the method already described.
2. Turn to the desired transmit frequency on the “Main” band, then press and hold in the
[
SET
]
key for 1/2 second.
3. Within ten seconds of pressing the
[
SET
]
key, use the “Main” band DIAL knob or
microphone’s
[
UP
]
/
[
DWN
]
buttons to select the same memory channel number as used
in step 1 above.
4. Press and hold in the PTT switch, then press the
[
SET
]
key momentarily while holding
the PTT switch to save the entry and exit to normal operation. This will not cause
transmission; instead, it signals the microprocessor that a separate transmit frequency is
being programmed into that memory register.
Whenever you recall a memory which contains independently-stored transmit and
receive frequencies, the “
[ ]
” indication will appear in the display.
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info