36015

Yaesu FT-7800 Manual

38
Zoom out
Zoom in
Previous page
1/80
Next page
36 FT-7800R OPERATING MANUAL
store, the press the
[
BAND
(
SET
)]
key momentarily to
move on to the next character. Letters, numbers, and
symbols are available for storage.
5. Again rotate the DIAL knob to select the desired letter,
number, or symbol, then press the
[
BAND
(
SET
)]
key
momentarily to move on to the next character’s slot. If
you make a mistake, press the microphone’s
[
DWN
]
button to move back to the previous
character’s slot, then re-select the correct letter, number, or symbol.
6. Repeat the above step to program the remaining letters,
numbers, or symbols of the desired label. A total of six
characters may be used in the creation of a label.
7. When you have completed the creation of the label, press the
[
BAND
(
SET
)]
key mo-
mentarily to save the label, then press and hold in the
[
BAND
(
SET
)]
key momentarily
for 1/2 second to normal operation.
8. When recall the Home channel which is appended an alpha-numeric “Tag” (label), press
the microphone’s
[
B
]
key momentarily to switch the
Home channel display between the “Frequency” format
and “Alpha-numeric Tag” format.
Menu #16 (HM/REV) allows configuration of the way you can access the “HOME”
channel. See page 70.
Memory Bank Operation
Memory Bank Assignment
1. Recall the memory channel to be assigned to a Memory Bank. Memory channels L1/U1
~ L50/U50 (band/scanning limit memories) may not be assigned to a Memory Bank.
2. Press and hold in the
[
SCAN
(
SEL
)]
key for 1/2 sec-
ond, then rotate the DIAL knob to select the Memory
Bank you want as the Memory Bank for this channel
(“BANK1” ~ “BANK20” ).
3. Press and hold in the
[
V/M
(
MW
)]
key
for 1/2 second to lock in the selected
Memory Bank, then press the
[
V/M
(
MW
)]
key momentarily to copy
the memory channel data into the
Memory Bank.
1) You may assign one memory channel into several Memory Banks.
2) The PMS memory channels (L1/U1 through L50/U50) may not be assigned to
a Memory Bank.
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
Memory Channel
CH 000 145.000 MHz
CH 001 145.500 MHz
CH 002 435.000 MHz
CH 003 435.500 MHz
CH 004 145.800 MHz
CH 005 436.000 MHz
CH 006 128.800 MHz
CH 997 145.620 MHz
CH 998 436.780 MHz
CH 999 128.600 MHz
Memory Bank “5”
Air Band Channels
Memory Bank “4”
Club Channels
Memory Bank “3”
All Amateur Band Channels
Memory Bank “1”
144 MHz Amateur Band Channels
Memory Bank “2”
430 MHz Amateur Band Channels
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7800 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info