36015

Yaesu FT-7800 Manual

37
Zoom out
Zoom in
Previous page
1/80
Next page
35FT-7800R OPERATING MANUAL
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
Deleting Memories
With 1000 “Regular” memories available (except memory channel “1”), there frequently
are situations where you may desire to delete certain memorized frequencies. The procedure
for deleting a channel is quite simple:
1. Press the
[
V/M
(
MW
)]
key, if needed, to enter the Memory mode.
2. Press and hold in the
[
V/M
(
MW
)]
key for 1/2 second, then rotate the DIAL knob to select
the memory channel to be deleted. Note that memory channel “1” may not be deleted.
3. Press the
[
SCAN
(
SEL
)]
key momentarily. The display will revert to memory channel
“1.” If you rotate the DIAL knob to the location you just deleted, you will observe that it
is now invisible.
Note: Once deleted, the channel data cannot be recovered.
HOME Channel Memory
A special one-touch “HOME” channel is
available (one for each of the five operat-
ing bands), to allow quick recall of a fa-
vorite operating frequency on each band.
HOME memory storage is simple to accom-
plish:
1. Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
2. Press and hold in the
[
V/M
(
MW
)]
key for one second. A memory number will appear
(blinking) on the display.
3. While the memory channel number is blinking, just press the
[
TONE
(
HM/RV
)]
key.
The frequency and other data (if any) will now be stored in the special HOME channel
register.
4. You may repeat this process on the other operating bands.
5. To recall the HOME channel, just press the
[
V/M
(
MW
)]
key momentarily while operat-
ing in the MR mode. From the VFO mode, press the
[
V/M
(
MW
)]
key twice. While you are operating on the
Home channel. an “H” icon will appear on the display.
You may also append to an Alpha-numeric “Tag” to a Home channel:
1. Recall the HOME channel which you wish to append a label.
2. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the enter the Set mode.
3. Rotate the DIAL knob to select Menu #24 (NM WRT).
4. Press the
[
BAND
(
SET
)]
key twice, then rotate the DIAL
knob to select the first character in the name you wish to
B
AND
FREQUENCY
USA VERSION EXP VERSION
144 MHz Ham Band 146.520 MHz 144.000 MHz
250 MHz Band 250.000 MHz 250.000 MHz
350 MHz Band 350.000 MHz 350.000 MHz
430 MHz Ham Band 446.000 MHz 430.000 MHz
850 MHz Band 850.000 MHz 850.000 MHz
DEFAULT HOME CHANNELS
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7800 in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info