478473

Yaesu FT-270R Manual

47
Zoom out
Zoom in
Previous page
1/88
Next page
FT-270R OPERATING MANUAL 43
WX Channel Priority
1. Recall the memory channel you wish to use as the “Priority” frequency.
2. Now, set the radio for operation on a WX channel by pressing and holding in the
[
1
(
SQ TYP
)]
key for one second.
3. Press the
[
F/L
]
key, then press the
[
VFO
(
PRI
)]
key to activate
the WX Priority mode. The display will remain on the WX chan-
nel frequency, but every five seconds the radio will check the
Priority Channel (memory channel) for activity.
4. Press
[
F/L
]
[
VFO
(
PRI
)]
again to disable the WX Priority mode.
VFO-VFO Dual Watch
1. Press the
[
VFO
(
PRI
)]
key to switch the VFO mode, if needed.
2. Press the
[
F/L
]
key, then press and hold in the
[
VFO
(
PRI
)]
key for one second. The
FT-270R will now periodically change from VFO-A frequency to the VFO-B frequency,
checking for activity on each VFO for 0.2 second interval.
3. Press the
[
VFO
(
PRI
)]
key to disable the VFO-VFO Dual Watch.
SCANNING
“PRIORITY CHANNEL” SCANNING
(
DUAL WATCH
)
Priority Revert Mode
During Priority channel operation (Dual Watch), a special feature is available which
will allow you to move to the Priority channel instantly, without waiting for activity to
appear on the Priority channel.
When this feature is enabled, and Priority monitoring is engaged, just press the PTT
switch; operation will instantly revert to the Priority channel.
To enable the Priority Revert operation:
1. Press the
[
F/L
]
key, then press the
[
0
(
SET
)]
key to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 36: PRI.RVT.
3. Press the
[
F/L
]
key momentarily to enable adjustment of
this Set Mode Item.
4. Rotate the DIAL knob to set this Set Mode Item to “RVT.
ON
.”
5. When you have made your selection, press the PTT switch
to save the setting and exit to normal operation.
6. To disable the Priority Revert operation, just repeat the above procedure, rotating
the DIAL knob to select “RVT.OFF” in step 4 above.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-270R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-270R in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info