478473
46
Zoom out
Zoom in
Previous page
1/88
Next page
FT-270R OPERATING MANUAL42
PRIORITY CHANNEL SCANNING
(
DUAL WATCH
)
The FT-270Rs scanning features include a two-channel scanning capability which allows
you to operate on a VFO or Memory channel, while periodically checking a user-defined
Memory Channel for activity. If a station is received on the Memory Channel which is
strong enough to open the Squelch, the scanner will pause on that station in accordance
with the Scan-Resume mode set via Set Mode Item 32: RESUME. See page 36.
Here is the procedure for activating Priority Channel Dual Watch operation:
VFO Priority
1. Recall the memory channel you wish to use as the “Priority” frequency.
2. Now, set the radio to the VFO mode by pressing the
[
VFO
(
PRI
)]
key.
3. Press the
[
F/L
]
key, then press the
[
VFO
(
PRI
)]
key to activate
the VFO Priority mode. The display will remain on the VFO fre-
quency, but every five seconds the radio will check the Priority
Channel (memory channel) for activity.
4. Press
[
F/L
]
[
VFO
(
PRI
)]
again to disable the VFO Priority mode.
Memory Channel Priority
1. Store the frequency you wish to be the “Priority” Channel into memory channel “1.”
2. Now, set the radio for operation on another memory channel.
3. Press the
[
F/L
]
key, then press the
[
VFO
(
PRI
)]
key to activate
the Memory Priority mode. The display will remain on the cur-
rent memory channel frequency, but every five seconds the ra-
dio will check the Priority Channel (memory channel “1”) for
activity.
4. Press
[
F/L
]
[
VFO
(
PRI
)]
again to disable the Memory Priority mode.
When the Memory Bank feature is activated, the FT-270R will check the lowest num-
bered memory channel in the current Memory Bank as the Priority Channel.
HOME Channel Priority
1. Recall the memory channel you wish to use as the “Priority” frequency.
2. Now set the radio for operation on the HOME channel by pressing the
[
F/L
]
key
followed by
[
REV
(
HOME
)]
.
3. Press the
[
F/L
]
key, then press the
[
VFO
(
PRI
)]
key to activate
the HOME Priority mode. The display will remain on the HOME
channel frequency, but every five seconds the radio will check
the Priority Channel (memory channel) for activity.
4. Press
[
F/L
]
[
VFO
(
PRI
)]
again to disable the HOME Priority mode.
SCANNING
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-270R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-270R in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info