674793
47
Zoom out
Zoom in
Previous page
1/64
Next page
FT-257 OperaTing Manual 45
Password
The
FT-257
provides a security password feature which can minimize the chance that
your transceiver could be used by an unauthorized party.
When the password feature is activated, the radio will ask for
the four digit password to be entered when the radio is rst
turned on. You must enter the four digit password from the
keypad. If the wrong password is entered, the microprocessor
will shut down the radio automatically.
To enter the password , use the following procedure:
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 27:
PSWD W
.
3. Press the
[
SET/ATS
]
key, then press the
[
F/MW
]
key
again to clear any previous password.
4. Rotate the
DIAL
knob to select the rst digit of the desired
number/letter (
0
-
9
,
A
,
B
,
C
,
D
,
E
, and
F
).
5. Press the
[
F/MW
]
key to move to the next digit.
6. Repeat steps 4 and 5 to program the remaining numbers/
letters of the desired password.
7. If you make a mistake, press the
[
q
]
key to move back to
the previous digit, then re-select the correct number/letter.
8. When you have nished entering the password, press the
PTT
switch to save the new setting and exit to normal operation.
We recommend that you write down the password, and keep it in a safe place so you
can easily nd it if you happen to forget.
To Activate the Password feature:
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 26:
PASSWD
.
3. Press the
[
SET/ATS
]
key momentarily to enable adjust-
ment of this Item.
4.
Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to set this Set Mode Item to
PWD. ON
.”
5. When you have made your selection, press the
PTT
switch to save the new setting
and exit to normal operation.
6. If you wish to disable the Password feature, just repeat the above procedure, rotat-
ing the
DIAL
knob to select “
PWD.OFF
” in step 4 above.
If you forget the password, you number, you may turn on the transceiver by perform-
ing the “All Reset” procedure (see page 50). However, the FT-257 will clear the pass-
word, as well as all memories, and will restore all other settings to factory defaults.
Miscellaneous Settings
honbun_130313.indd 45 2013/03/13 20:30:11
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-257 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-257 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info