674793
45
Zoom out
Zoom in
Previous page
1/64
Next page
FT-257 OperaTing Manual 43
Storing the ANI code
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 2:
ANI.WRT
.
3. Press the
[
SET/ATS
]
key momentarily to display any
previously-stored ANI code.
4. Press the
[
F/MW
]
key again to clear any previous ANI code.
5. Rotate the
DIAL
knob to select the rst number/letter (
0
-
9
,
A
,
B
,
C
,
D
,
E
(substitute
for
”), and
F
(substitute for “#”), then press the
[
F/MW
]
key momentarily to save
the rst letter/number and move on to the next character.
6. Repeat the previous step, as many times as necessary (up to 16 characters), to com-
plete ANI code. If you make a mistake, press the
[
q
]
key to move back to the previ-
ous letter/numbers slot, then re-select the correct letter/number.
7. When you have nished entering the ANI code and it contains less than 16 charac-
ters, press and hold in the
[
F/MW
]
key for one second to conrm the callsign. (if the
ANI code has exactly 16 characters, you do not need to press and hold in
[
F/MW
]
in
this step).
8. Press the
PTT
switch to save the settings and exit to normal operation.
Activating the ANI feature
1. Press the
[
SET/ATS
]
key to enter the Set mode.
2. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select
Set Mode Item 1:
ANI
.
3. Press the
[
SET/ATS
]
key momentarily to enable adjust-
ment of this Set Mode Item.
4. Rotate the
DIAL
knob or press the
[
p
]
/
[
q
]
key to select “
ON
.”
5. Press the
PTT
switch to save the new setting and activate the ANI feature.
6. Press the
PTT
switch to send the DTMF tones stored in ANI memory.
7. To disable the ANI feature, just repeat the above procedure, rotating the
DIAL
knob
or press the
[
p
]
/
[
q
]
key to select “
OFF
” in step 4 above.
DTMF Operation
honbun_130313.indd 43 2013/03/13 20:30:09
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-257 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-257 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info