Manual Yaesu FT-252 (page 31 of 68) (English)

674792

Zoom out

Zoom in

1/68

FT-252 OperaTing Manual 29

The

FT-252

allows you to scan just the memory channels, the entire operating band,

or a portion of that band. It will halt on signals encountered, so you can talk to the

station(s) on that frequency, if you like.

Scanning operation is basically the same in each of the above modes. Before you begin,

take a moment to select the way in which you would like the scanner to resume scan-

ning after it halts on a signal.

Setting the Scan-Resume Technique

Three options for the Scan-Resume mode are available:

BUSY

: In this mode, the scanner will halt on a signal it encounters. Two seconds after

the carrier has dropped because the other station(s) ceased transmission, the

scanner will resume. In the case of constant-carrier signals like Weather Station

broadcasts, the scanner will likely remain on this frequency indenitely.

HOLD

: In this mode, the scanner will halt on a signal it encounters. It will not restart

automatically; you must manually re-initiate scanning if you wish to resume.

TIME

: In this mode, the scanner will halt on a signal it encounters, and will hold there

for ve seconds. If you do not take action to disable the scanner within that time

period, the scanner will resume even if the stations are still active.

To set the Scan-Resume mode:

1. Press the

[

SET/ATS

]

key to enter the Set mode.

2. Rotate the

DIAL

knob or press the

[

]

[

]

key to select

Set Mode Item 29:

RESUME

3. Press the

[

SET/ATS

]

key momentarily to enable adjust-

ment of this Item.

4. Rotate the

DIAL

knob or press the

[

]

[

]

key to select the desired scan-resume

mode.

5. When you have made your selection, press the

PTT

switch to save the new setting

and exit to normal operation.

The default condition for this Set Mode Item is “TIME”.

Scanning

Setting tHe SqueLcH LeveL during Active ScAnning oPerAtion

The

FT-252

allows adjustment of the Squelch level “on the y” while you are scanning.

1. While the scanner is engaged, press the

[

VOL/SQL

]

key twice (the current squelch

level (e.g. “

LVL 1

”) will appear in ne print above the frequency display).

2. Rotate the

DIAL

knob or press the

[

]

[

]

key to select the desired Squelch

level.

3. Press the

PTT

switch momentarily to save the new setting and exit to normal

operation. In this case, pressing the

PTT

switch this one time will not causing

scanning to stop.

honbun_130313.indd 29 2013/03/13 19:47:58

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-252 in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yaesu FT-252 Manual

Product: