478472

Yaesu FT-250R Manual

31
Zoom out
Zoom in
Previous page
1/44
Next page
FT-250R OPERATING MANUAL 27
The ARTS feature uses DCS signaling to inform both parties when you and another ARTS-
equipped station are within communications range. This may be particularly useful during
Search-and Rescue situations, where is important to stay in contact with other members of
your group.
If the other radio is in range, the beeper will sound (if
enabled) and the display will show “
IN RNGIN RNG
IN RNGIN RNG
IN RNG” as op-
posed to the out of range display “
OUT RNGOUT RNG
OUT RNGOUT RNG
OUT RNG” in which
ARTS operation begins.
If you move out of range for more than one minute
(four pollings), your radio will sense that no signal
has been received, three beeps will sound, and the dis-
play will revert to “
OUT RNGOUT RNG
OUT RNGOUT RNG
OUT RNG.” If you move back into range, your radio will again beep,
and the display will change back to the “
IN RNGIN RNG
IN RNGIN RNG
IN RNG” indication.
You must terminate ARTS in order to resume normal operation. This is a safety feature
designed to prevent accidental loss of contact due to channel change, etc.
Here is how to activate ARTS:
BASIC ARTS SETUP AND OPERATION
c
Set your radio and the other radio(s) to the same DCS code number, per the discussion
on page 16.
d
Press
[
F/L
] key
, then press the
[
7
(
P1
)
]
key* to activate the ARTS operation.
e
Press the
[
F/L
]
key. You will observe the “
OUT RNGOUT RNG
OUT RNGOUT RNG
OUT RNG” display on the LCD. ARTS
operation has now commenced.
f
Every 15 seconds, your radio will transmit a “polling” call to the other station. When that
station responds with its own ARTS polling signal, the display will change to “
IN RNGIN RNG
IN RNGIN RNG
IN RNG” to
confirm that the other station “polling” code was received in response to yours.
g
Press the
[
F/L
]
key again to exit ARTS operation and resume normal functioning of
the transceiver.
*The “default” function of the
[
7
(
P1
)
]
is “ARTS.”
If you are changed the
[
7
(
P1
)
]
key assignment to another function described previously,
ARTS setup and operation procedure is following:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #13 (“
ARTSARTS
ARTSARTS
ARTS”).
e
Press the
[
F/L
]
key twice to active the ARTS operation.
ARTS
(
Automatic Range Transponder System
)
Operation
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-250R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-250R in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info