478472
30
Zoom out
Zoom in
Previous page
1/44
Next page
FT-250R OPERATING MANUAL26
MANUAL DTMF TONE GENERATION
You can generate DTMF tones during transmission manually.
Press the PTT switch to begin transmission.
While transmitting, press the desired numbers on the keypad.
When you have sent all the digits desired, release the PTT key.
DTMF AUTODIALER
Nine DTMF Autodial memories are provided, allowing you to store telephone numbers
for autopatch use. You can also store short autopatch access code streams so as to avoid
having to send them manually.
Here is the DTMF Autodial storage procedure:
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
Rotate the DIAL to select Menu Item #28 (“DTMF”).
Press the
[
F/L
]
key to enable adjustment of this Menu item.
Rotate the DIAL to select the DTMF Memory register (“d1” through “d9”) into which
you wish to store this DTMF string.
Press the
[
F/L
]
key, then press the
[
F/L
]
key again to begin DTMF Memory entry into
the selected register.
Rotate the DIAL to select the first digit of the desired label. When you have made your
selection, press the
[
(
MHz
)
]
key momentarily to move to the next digit.
Repeat the previous step to program the remaining, numbers of the desired number. A
total of 16 digits may be used in the creation of a label.
Press the
[
F/L
]
key, then press the PTT switch to save the setting. To store other num-
bers, repeat this process, using a different DTMF memory register.
To send the telephone number:
Press
[
F/L
]
, then the
[
9
(
DTMF
)
]
key to activate the DTMF Autodialer function. The
“DTMF” icon appears on the display.
Press the PTT switch to begin transmission.
Press the numerical key (
[
1
]
through
[
9
]
) corresponding to the DTMF memory string
you wish to send. Once the string begins, you may release the PTT key, as the trans-
mitter will be held “on the air” until the DTMF string is completed.
DTMF Operation
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-250R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-250R in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info