478472
15
Zoom out
Zoom in
Previous page
1/44
Next page
FT-250R OPERATING MANUAL 11
f
Rotate the DIAL to select the desired “Sleep” duration. The selections available are
200 ms, 300 ms, 500 ms, 1 second, and 2 seconds, or OFF. The default value is 200 ms.
g
When you have made your selection, press the PTT key to save the new setting and
exit to normal operation.
When you are operating on Packet, switch the Receive Battery Saver OFF, as the sleep
cycle may “collide” with the beginning of an incoming Packet transmission, causing
your TNC not to receive the full data burst. Likewise, during voice operation, part of the
first word of an incoming transmission may be cut off during (normal) Battery Saver
operation.
TX BATTERY SAVER
The FT-250R also includes a useful Transmit Battery Saver, which will automatically
lower the power output level when the last signal received was very strong. With the
Transmit Battery Saver, the automatic selection of Low Power operation conserves bat-
tery drain significantly.
To activate the Transmit Battery Saver:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #10 (“
TX SAVETX SAVE
TX SAVETX SAVE
TX SAVE”).
e
Press the
[
F/L
]
key to enable adjustment of this Menu item.
f
Rotate the DIAL so as to select ON (thus activating the Transmit Battery Saver).
g
When you have completed your selection, press the PTT key to save the new setting
and exit to normal operation.
KEYPAD/LCD ILLUMINATION
Your FT-250R includes a reddish illumination lamp which aids in nighttime operation.
Three options for activating the lamp are provided:
KEYKEY
KEYKEY
KEY : Pressing any key (except PTT) causes the lamp to provide illumination for 5
seconds, after which the lamp will automatically shut off.
5SEC5SEC
5SEC5SEC
5SEC : Pressing the LAMP switch momentarily causes the lamp to provide illumina-
tion for 5 seconds, after which the lamp will automatically shut off.
TOGGLETOGGLE
TOGGLETOGGLE
TOGGLE : Pressing the LAMP switch momentarily “Toggles” the lamp on and off. The
lamp will stay illuminated until you press the LAMP switch once more.
Here is the procedure for setting up the Lamp mode:
c
Press the
[
F/L
]
key, then immediately press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Now rotate the DIAL to select Menu Item #21 (“
LMP MODLMP MOD
LMP MODLMP MOD
LMP MOD”).
e
Press the
[
F/L
]
key to enable modification of the current setting.
f
Next, rotate the DIAL to select one of the three modes described above.
g
When you have made your choice, press the PTT key to save the new setting for Menu
Item #21. The transceiver will now return to normal operation.
Advanced Operation
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-250R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-250R in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info