478472
13
Zoom out
Zoom in
Previous page
1/44
Next page
FT-250R OPERATING MANUAL 9
Setting repeater Tx Offset
Although you should keep the repeater offset programmed to that used in your area, you
can change the default repeater offset for special applications:
c
Press the
[
F/L
]
key, then immediately press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #4 (“
SHIFTSHIFT
SHIFTSHIFT
SHIFT”).
e
Press the
[
F/L
]
key to enable modification of the current setting.
f
Rotate the DIAL to select the new shift offset frequency (selectable in 50-kHz incre-
ments only).
g
Press the PTT key to save the new setting and exit to normal operation.
Checking the Repeater Uplink (Input) Frequency
It often is helpful to be able to check the uplink (input) frequency of a repeater, to see if the
calling station is within direct (“Simplex”) range.
To do this, just press the
[
REV
(
HM
)
]
key momentarily. If Menu Item #20 (“
REVREV
REVREV
REV/
HMHM
HMHM
HM”)
has been set to “
HMHM
HMHM
HM,” you may press the
[
F/L
]
key, and then
[
REV
(
HM
)
]
key. To return to
the normal uplink/downlink frequency relationship, repeat this step.
KEYBOARD LOCKING
To activate the locking feature, press and hold in the
[
F/L
]
key for one second. The “
icon will appear on the LCD. To cancel locking press and hold in the
[
F/L
]
key again for
one second.
In order to prevent accidental frequency change or inadvertent transmission, various as-
pects of the FT-250Rs DIAL, keypad and switches may be locked out. You may change
the lockout combinations.
To lock out some or all of the keys:
c
Press the
[
F/L
]
key, then press the
[
0
(
SET
)
]
key to enter the Set mode.
d
Rotate the DIAL to select Menu Item #32 (“
LK MODELK MODE
LK MODELK MODE
LK MODE”).
e
Press the
[
F/L
]
key to enable setting of the Lock mode (which defines which keys/
functions are to be locked out).
f
Rotate the DIAL to the desired locking scheme as listed below:
KEYKEY
KEYKEY
KEY: Just the front panel keys are locked out
DIALDIAL
DIALDIAL
DIAL: Just the top panel DIAL is locked out
KK
KK
K +
D D
D D
D (
KEYKEY
KEYKEY
KEY +
DIALDIAL
DIALDIAL
DIAL) : Both the DIAL and Keys are locked out
PTTPTT
PTTPTT
PTT: The PTT switch is locked (TX not possible)
KK
KK
K +
P P
P P
P (
KEYKEY
KEYKEY
KEY +
PTTPTT
PTTPTT
PTT) : Both the keys and PTT switch are locked out
DD
DD
D +
P P
P P
P (
DIALDIAL
DIALDIAL
DIAL +
PTTPTT
PTTPTT
PTT) : Both the DIAL and PTT switch are locked out
ALLALL
ALLALL
ALL: All of the above are locked out
g
When you have made your selection, press the PTT key momentarily to save the new
setting and resume normal operation.
Basic Operation
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-250R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-250R in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info