Manual Yaesu FT-2000D (page 16 of 140) (English)

478497

Zoom out

Zoom in

1/140

Page 14 FT-2000D OPERATING MANUAL

INSTALLATION AND INTERCONNECTIONS

INTERFACING TO OTHER LINEAR AMPLIFIERS

NOTE

 The TX/RX switching in the linear amplifier is con-

trolled by switching components in the transceiver. The

relay circuit of the FT-2000D used for this switching

is capable of switching AC voltage of 100 Volts at up

to 300 mA, or DC voltages or 60 V at 200 mA or 30 V

at up to 1 Amp. In order to engage the switching relay,

use Menu item “146 tGEn ETX-GND;” set this Menu

item to “

EnAEnA

EnA (Enable)” to activate the amplifier switch-

ing relay.

 The specified range for ALC voltage to be used with

the FT-2000D is 0 to –4 Volts DC.

 Amplifier systems utilizing different ALC voltages will

not work correctly with the FT-2000D, and their ALC

lines must not be connected if this is the case.

EERYALC

ACFUSEGND

RF INRF OUT

My FT2000D will not Transmit. Have not used it in over a year. I am sure it is something I have done wrong. Whe u puss PTT the signal goes to ZERO. Please Advise! Submitted on 12-9-2020 at 00:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-2000D in the language / languages: English as an attachment in your email.

The manual is 7,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yaesu FT-2000D Manual

Product: