674723
40
Zoom out
Zoom in
Previous page
1/56
Next page
DR-2X / DR-2XE Operating Manual38
Setting the display turn-off time
1 Touch
[
A SETUP
]
or
[
B SETUP
]
, then touch
[
F
]
, and then touch
[
MODE/REMOTE
]
.
2 Touch
[
DISPLAY TIMER
]
to display “ON” or “OFF”
.
The set value will change between
OFF
and
ON
each time
[
DISPLAY
TIMER
]
is touched.
3 Touch
[
SETUP
]
.
The display timer setting screen will be displayed.
4 Touch
[
TIMER
]
.
The set value will change in the following sequence each time
[
TIMER
]
,
[
],
or
[
]
is touched (Default 1min).
à “1min” à “5min” à “10min” à “30min” à
5 Touch
[
BACK
]
4 times.
The setting is determined and the display will return to the operation mode screen.
z Factory default:
DISPLAY TIMER: ON
TIMER: 1min
z This setting item is common to CH-A and CH-B.
Password
To continue operating the DR-2X/DR-2XE when the power is turned ON or after the display has been turned
OFF, the password must be entered.
z Password is factory set to “0000”. It is possible to change the password.
z If you forget your password, you will need to do an all reset. Please note
that when all reset is performed, all settings and memory contents are
returned to the factory default state.
z Use the factory default password “0000”, unless it is necessary to change
it for management security.
1 Touch
[
A SETUP
]
or
[
B SETUP
]
, then touch
[
F
]
, and then touch
[
MODE/REMOTE
]
.
2 If
[
DISPLAY TIMER
]
is set to “OFF”, touch
[
DISPLAY TIMER
]
and turn
it to “ON”.
3 Touch
[
SETUP
]
.
4 Touch
[
PASSWORD
]
twice.
The character input screen will appear.
The touched character will be displayed at the top of the screen.
Four numeric characters can be entered.
The cursor in the input field moves left or right when
[|
]
or
[
|]
is
touched.
5 Touch
[
BACK
]
4 times.
The setting is determined and the display will return to the operation
mode screen.
M/V
BACK
BACK
>
OFF
ON
REMOTE
COMMAND
DISPLAY TIMER
REMOTE/COMMAND/DISP TIMER
PASSWORD
Space
123
ENT
z The password input screen will be displayed when the power is turned ON, or after the display has been turned OFF.
Enter the previously registered 4-digit password (default “0000”).
z To reset the DR-2X/DR-2XE, press and hold in the
[
SETUP
]
button while turning the transceiver ON à the password
input screen will appear à press and hold the
[
SETUP
]
button for 2 seconds à the reset confirmation screen will
appear à touch “OK?”.
M/V
BACK
BACK
>
OFF
ON
REMOTE
COMMAND
DISPLAY TIMER
REMOTE/COMMAND/DISP TIMER
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-2XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-2XE in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info