674723
38
Zoom out
Zoom in
Previous page
1/56
Next page
DR-2X / DR-2XE Operating Manual36
Set the tone signal type for analog FM mode
1 Touch
[
A SETUP
]
or
[
B SETUP
]
, then touch
[
F
]
, and then touch
[
SQL
]
.
2 Select
[
RX SQL
]
to set the tone signal type during reception, or select
[
TX SQL
]
to set the tone signal type during transmission.
3 Touch
[
]
or
[
]
.
The setting will change in the following sequence each time
[
]
or
[
]
is
touched.
RX SQL: à “OFF” à “TONE” à “DCS” à “T-CALL” à “T-CALL+TONE”
à “T-CALL+DCS” à
TX SQL: à “OFF” à “TONE” à “DCS” à
4 Touch
[
BACK
]
3 times.
The setting is determined and the display will return to the operation mode screen.
z Factory default: OFF
z When “T-CALL” is set, the relay starts after receiving 1750 Hz Tone Burst more than 0.5 second. When “T-CALL+TONE”
or “T-CALL+DCS” is set, either T-CALL/TONE or T-CALL/DCS relays to receive.
z Both TX and RX can be set to different tone signal type.
z This item may be set separately on CH-A and CH-B.
Set the ID announcement for analog FM mode
Set the announcement mode
1 Touch
[
A SETUP
]
or
[
B SETUP
]
, then touch
[
F
]
, and then touch
[
ID ANNOUNCE
]
.
2 Touch
[
ANNOUNCE
],
then touch
[
ANNOUNCE MODE
]
.
The set value will change in the following sequence each time
[
ANNOUNCE MODE
]
,
[
],
or
[
]
is touched.
à “CW” à “CW wo TONE” à “VOICE”
ø
à
à “VC wo TONE”
ø
(VOICE wo TONE) à
ø: Requires optional Voice Guide Unit FVS-2.
3 Touch
[
ANNOUNCE LEVEL
]
.
The set value will change in the following sequence each time
[
ANNOUNCE LEVEL
]
,
[
],
or
[
]
is touched.
à “HIGH” à “MID” à “LOW” à
4 Touch
[
CW ID SPEED
]
.
The set value will change in the following sequence each time
[
CW ID SPEED
]
,
[
],
or
[
]
is touched.
à “16wd/min” à “20wd/min” à “24wd/min” à “32wd/min” à
5 Touch
[
BACK
]
4 times.
The setting is determined and the display will return to the operation mode screen.
z Factory default:
ANNOUNCE MODE: CW
ANNOUNCE LEVEL: MID
CW ID SPEED: 20wd/min
z This setting item is common to CH-A and CH-B.
z When operating in the USA the CW ID SPEED setting time must not exceed 20 words per minute when keyed by an
automatic device, to comply with the FCC rule Part 97: Sec. 97.119 (b)(1) Station identification.
8
4
DG-ID
T-OFF
R-OFF
SETUP RXx.xx TX .x
8
4
DG-ID
T-OFF
R-OFF
SETUP RXx.xx TX .x
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DR-2XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DR-2XE in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info