478460
38
Zoom out
Zoom in
Previous page
1/56
Next page
DMU-2000 DATA MANAGEMENT UNITPage 36
LOG BOOK FUNCTION
LOADING LOG DATA
(
LOAD
)
You may load log data from a CF card into your DMU-2000 (for example, an archive copy, or a log from a different DMU-
2000 or FT DX 9000 Series Transceiver). Before starting, be sure the CF card containing the log data has been inserted
into the CF Card Slot.
1. Referring to Figure
on page 31, press the
[
KEY7
(
SAVE/LOAD
)]
key to engage the Save/Load
mode.
2. Press the
[
KEY5
(
SAVE/LOAD
)]
key to engage the
LOAD protocol.
3. Use the
[
KEY1
(
)]
and
[
KEY2
(
)]
keys to select
the file you wish to upload to the transceiver, then press
the
[
KEY6
(
GO
)]
key to load the file.
SAVE/LOAD MODE
SAVING LOG DATA
Log data can be saved to the supplied Compact Flash (CF) card.
1. Referring to Figure
on page 31, press the
[
KEY7
(
SAVE/LOAD
)]
key to move to the Save/Load
page.
2. Press the
[
F5
(
SAVE/LOAD
)]
key to choose the
“Save” protocol.
3. Input the desired FILE NAME, and press the
[
KEY6
(
GO
)]
key to save the data in the CF card.
Note: Be sure not to delete the file “extension” to the file
name, when entering the file name. If the extension is
missing, it will not be possible to load log data.
If the ERROR message “CF CARD IS NOT READY
appears on the display, please confirm that the CF card is
inserted correctly into its slot.
Please note: When memory data is saved to the CF card,
any file with the same name as the current file will be
revised (overwritten), and the previous data will be de-
leted.
Advice: The user configuration protocol (CONFIG) al-
lows you to specify the file format that is used for saving
log data. The available formats are:
ADIF (
International Log Format
) ............................ adi
CSV (
Cursor-Limited Values
) ................................. csv
TXT (
Tab-Limited Values
) ....................................... txt
CABRILLO (
International Log Format
) .....cabrillolog
SAVE/LOAD MODE
Advice: When entering the file name, be sure not to delete
the file “extension”. A missing extension will make it
impossible to load log data.
If the ERROR message “CF CARD IS NOT READY
appears on the display, please confirm that the CF card is
inserted correctly into its slot.
When memory data is loaded from the CF card, the cur-
rent memories stored in the DMU-2000 will be over-writ-
ten, and the previous data is erased. We recommend that
you save and download the current memory data to the
CF card, if you want to use it again later.
MANUAL
REFERENCE
[
KEY1
(
xxx
)]
[
KEY2
(
xxx
)]
[
KEY3
(
xxx
)]
[
KEY4
(
xxx
)]
[
KEY5
(
xxx
)]
[
KEY6
(
xxx
)]
[
KEY7
(
xxx
)]
[
KEY8
(
xxx
)]
FT-950
FTDX5000
[
1.8
(
1
)]
[
3.5
(
2
)]
[
7
(
3
)]
[
10
(
4
)]
[
14
(
5
)]
[
18
(
6
)]
[
21
(
7
)]
[
24.5
(
8
)]
FT-2000
FT-2000D
[
F1
(
CH-1
)]
[
F2
(
CH-2
)]
[
F3
(
CH-3
)]
[
F4
(
CH-4
)]
[
F5
(
MEM
)]
[
F6
(
DEC
)]
[
F7
(
P.BACK
)]
[
DISPLAY
]
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DMU-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DMU-2000 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info