478460
36
Zoom out
Zoom in
Previous page
1/56
Next page
DMU-2000 DATA MANAGEMENT UNITPage 34
LOG BOOK FUNCTION
LOG BOOK DATA INPUT
Log data may be entered by the user. Depending on the user (CONFIG) setup for “LOGGING TYPE,” there are two
logging modes: In the “CONTEST” mode, the operator just enters the callsign, signal report, and the REM (“remarks”)
fields, and the Date/Time/Band/Mode are all entered automatically. In the “NORMAL” mode, additional information may
be entered, such as the Country, City, and Name. Up to 500 stations may be stored into a file.
Please enter the log data in accordance with the example in the illustration.
Advice: Before you start logging, we recommend that you perform the CONFIG SETTING MODE procedure within the
User setup (CONFIG) protocol.
1. Referring to the Figure
on page 31, use your key-
board to enter the callsign in the “CALL” field. Then
press the keyboard’s
[
ENTER
]
key.
2. The callsign will be checked against the previous en-
tries to see if it is a duplicate; if so, the “CALLSIGN
REPETITION CHECKLIST” will open, listing this
and any other duplicates. During the QSO, if you wish
to delete the callsign and other information for this
line, just press the keyboard’s
[
ESC
]
key.
3. Enter all desired data in accordance with the example
in the picture. When finished, press the keyboard
[
EN-
TER
]
key.
Note: In order to ensure preservation of log data, be sure
to Save the data frequently. It is always a good idea to
maintain a paper archive copy of log data. Vertex Stan-
dard specifically disclaims responsibility for any liability
arising from the loss of log data.
CALLSIGN REPETITION CHECK LIST
Advice: When entering the Zone via the “ITUZR” field,
pressing the key-board
[
ENTER
]
key will move you to
the CQ Zone (CQZR); from there, use the key-board’s
[
]
key to navigate back to the “ITUZR” field, if desired.
When doing input of the “PREFIX,” “CQZR” (or
ITUZR”), “ENTITY,” and “QRA” data, please set the
LOGGING TYPE” to “NORMAL” beforehand. This
will allow you to move from column to column by press-
ing the key-board’s
[
ENTER
]
key. In addition, when (for
example) entering the “PREFIX” and pressing the key-
board’s
[
ENTER
]
key, the “PREFIX SELECT LIST
will appear, and the “ENTITY” and “CQZR” (or “ITUZR”)
will automatically be entered.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu DMU-2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu DMU-2000 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info