484160
9
Zoom out
Zoom in
Previous page
1/39
Next page
System Setup Menu
16
Adjusting a feature
1. Enter the option field for the feature you want to adjust by pressing the (OK) button on the
remote control. A submenu appears in a second row with the selected option.
2. Select a new value by pressing the direction button.
3. Confirm your selection by pressing the (OK) button. The new value setup is complete.
Adjusting the clock
1. Access the “Clock” setting under the general setup menu.
2. Press the direction button on the remote control to move the cursor to the “Hour” or “Min” position,
and press the (OK) button. You also can touch the “Hour” or “Min” position directly.
3. The numeric keypad will pop up.
4. Press the numeric button on the remote control or touch the numeric keypad on the screen to
adjust the hour or minutes.
5. Press the (OK) button on the remote control or on the keypad of the screen to confirm the setup.
Return to normal playback
The system will automatically return you to the previous playback mode after idling for a few seconds.
Setting Options Function
Radio
USA
Select the appropriate setting based on the country in which
Latin
you reside.
Europe
Russian
TS Calibrate
No
Touch “Yes” to enter the touch screen calibrate mode
Yes
TFT Auto Open
On The TFT panel automatically opens when the unit is turned on.
Off
You must press the button on the TFT panel or the button
on the remote control to open the TFT .
Manual
The monitor does not open or close when the unit is turned on
or off.
Clock Mode
12Hr Clock displays 12 hour time using AM and PM.
24Hr Clock displays 24 hour time up to 23:59.
Clock 00:27 Present time.
Load Factory No/Yes Load all factory parameters to their original setting.
17
Screen Setting
Accessing the screen setup menu
Press the (MENU) button on the remote control to access the MAIN menu.
Select the ”Setup” icon on the bottom and tap (Screen).
Adjusting a feature
Setting Options Function
Screen Tilt 1 to 5
Press the ( / ) buttons on the remote control touch the (1 to 5) number on
the screen directly to adjust the tilt of the screen to the desired angle.
Screen Saver On
Touch to activate/deactivate the screen saver.
Off
Version Displays the software version of the unit.
Selecting a feature for adjustment
Press the direction buttons on the remote control or touch the option directly on-screen to
select the feature to be adjusted.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xzent XT7012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xzent XT7012 in the language / languages: English, German as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info