484160
7
Zoom out
Zoom in
Previous page
1/39
Next page
Basic Operations
Power On / Off
Press the POWER OFF /VOL button to turn the unit on. The buttons on the front panel of the unit
are illuminated
. You can also turn on the unit by pressing the POWER button ( ) on the
remote control.
Press and hold the POWER OFF /VOL button on the front panel for more than 1 second or
press the POWER button ( ) on the remote control to power off the unit. The monitor is drawn
back into the main compartment.
Playing Source Selection
Press the MODE button on the front panel or the (SRC) button on the remote control to change
among available playing sources: TUNER, DVD, AUX IN, USB. The playing mode is displayed on
the TFT display.
Volume Adjustment
To increase or decrease the volume level, turn the POWER OFF/VOL on the front panel or press
the (VOL+/ VOL-) buttons on the remote control. The volume ranges from “0” to “40”. The default
volume is “10” each time when the unit is powered on. Default volume memory setup: Rotate
Power Off/VOL knob on the front panel to select volume value and then press and hold the Power
Off/VOL button. If you try to store a volume above 20, the default value is automatically capped to
20. The default volume for traffic anouncements can be adjusted separately. Maximal TA volume
value is not capped.
Audio Control Menu
The audio control feature allows you to easily adjust your audio system to meet the acoustical
characteristics of your vehicle, which vary depending on the type of vehicle and its design and
acoustic dispersion. To get the best possible sound quality from your new system, be sure to adjust
the settings for the speakers as well. Proper setting of the fader and balance boosts the effects of
the cabin equalizer. For plain linear amplification choose flat, or the original USER settings.
Audio adjustments
Audio Function Adjustable Range
EQ Flat
Jazz
Pop
Classical
Rock
News
Urban
Rave
Movie
Techno
User
BASS -7 to +7
TREBLE -7 to +7
BALANCE -9 to +9
FADE -9 to +9
LOUD off, on
12
NOTE: The bass and treble levels are only adjustable when EQ is in “User” mode.
The loudness function compensates for deficiencies in sound ranges at low levels. When the
loudness function is on, LOUD is displayed on the screen.
Exiting the audio control menu
Touch the return arrow on the top right of the display.
Press the (ESC) button on the remote control to exit the audio control menu.
System Reset
To correct a system halt or other unusual operation, use the tip of a pen to press the RESET button
located on the front bottom-right corner of the unit.
13
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xzent XT7012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xzent XT7012 in the language / languages: English, German as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info