590255
25
Zoom out
Zoom in
Previous page
1/34
Next page
25
The gateway for Smart Linux TV
User Manual
C. Manual Scan of Services
[Menu -> Setup -> Service Searching -> Manual Scan]
If you know well enough to configure each exact setting required for manual search of services, you can select
manual scan as well. There are many parameter values that you need to configure as below.
Amongst other things, the below parameters are what you need to decide prior to performing manual scan.
Tuner
You need to decide which tuner you want to use for manual scan.
System
Here you have two options between DVB-S (SD) and DVB-S2 (HD).
Frequency
You need to enter the exact frequency of the transponder that you want to scan.
Symbol Rate
You need to enter the exact symbol rate of the transponder that you want to scan
Polarity
Here, you have options for Horizontal, Vertical, Circular Left and Circular Right. You need to know the polarity of the transponder
that you want to scan.
FEC (Forward Error Correction)
You need to enter the exact FEC value of the transponder that you want to scan
Modulation
Here you have two options for QPSK (SD) and 8PSK (HD).
Network Scan
Here you have two options for YES and NO. NO is used to scan the transponder (TP) based on the data that your STB currently has.
YES is used to scan the TP not just based on the existing TP data but also using new TP data, if there is TP data newly transported
from the TP. Naturally, YES option takes longer while it may results in a better scan result.
Clear Before Scan
YES is used when you want to delete the existing channel list before you start the automatic scan. If you want to keep the existing
list, select NO.
Only Free Scan
Here you have two options for YES and NO. You want to scan only Free to Air channels without any encryption, select YES.
Otherwise, select NO to scan all FTA and CAS channels.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xtrend ET 10000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xtrend ET 10000 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Xtrend ET 10000

Xtrend ET 10000 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info