765110
25
Zoom out
Zoom in
Previous page
1/28
Next page
TR3.0 Treadmill
23
The console has built in maintenance/diagnostic software. The software will allow you to
make changes to the console settings such as changing units from English to Metric or turn-
ing off the console beeps (if they are waking your family during your early morning workouts).
To enter the Maintenance Menu (may be called Engineering Mode, depending on version)
press and hold down the Start, Stop and Enter keys. Keep holding the keys down for about
ve seconds and the message window will display “Engineering Mode”. Press the Enter key
to access the menu below. Press the 5/6 keys to navigate the menu.
a. Key Test - Allows you to test all the keys to make sure they are functioning
b. Display Test - Tests all display functions
c. Functions - Press Enter to access settings, use 5/6 keys to navigate.
i. Sleep Mode - On; when turned on the console will darken after 30 minutes of no use.
When turned off the console will remain lit as long as the power is on
ii. Display Mode - Turn off to have the console power down automatically after 30 min-
utes of inactivity; leave on to display all lights while the power is on
iii. Pause mode – On; when turned off, pressing Stop once ends the program; when
turned on, the
console retains data for ve minutes before switching to the startup screen
iv. Odometer Reset - Reset the odometer
v. Units - Set to English or Metric display readings
vi. Motor Test - Continually runs the tensioning gear motor
d. Security - Allows you to lock the keypad so no unauthorized use is allowed. When the
child lock is enabled, the console will not allow the keypad to operate unless you press
and hold the Start and Enter keys for three seconds to unlock the console.
e. Factory Settings
To save and exit, press the Stop key
Error Messages
LS: The treadmill hasn’t received a speed signal for 8 seconds.
E1: Console memory malfunction or CPU problem.
E2: Incline position error.
Engineering Mode
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xterra TR3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xterra TR3.0 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info