606338
15
Zoom out
Zoom in
Previous page
1/21
Next page
Xterra SB540r Bike
14
Console Operation
Quick Start mode
This is the quickest way to start a workout. After the console powers up you just press the Start key
to begin. In Quick Start the Time will count up from zero and the workload may be adjusted
manually by pressing the Up or Down keys. The dot matrix display will show a work profile with a ¼
mile track around it and a lap counter to the left. Pressing the Enter key will switch the display from
track to a hill type profile. To the right of the dot matrix is a number that indicates your work level.
Basic information and functions:
The Data displays:
Pulse
indicates your heart rate if you are grasping the hand pulse sensors.
Time
shows elapsed time unless you set the timer to count down.
Distance
displays accumulated mileage.
Calories show an accumulation of calories burned (Kcal). The number shown is just an
estimate; your actual calorie burn most likely will be different. The only way to get an
accurate calorie reading is in a laboratory setting connected to a host of machines.
Message Window: Instructions are displayed to assist in programming the console and during a
workout the message window will display workout data as described below.
Speed
shows your speed in miles per hour if there is an  displayed to the left of the
track/profile window, and kilometers per hour if Km is displayed. Press the Enter key to
switch the display to see your Speed in RPM.
Level
Pressing the enter key again will switch the display to show your current work level.
The Elliptical has a built in heart rate monitoring system. Simply grasping the hand pulse sensors
on the stationary handle bars will start the heart Icon blinking (this may take a few seconds). The
Pulse Display Window will display your heart rate in beats per minute.
The Stop/Reset button performs several functions. Pressing the Stop/Reset key once during a
program will Pause the program for 5 minutes. If you need to get a drink, answer the phone or any
of the many things that could interrupt your workout, this is a great feature. To resume your workout
during Pause just press the Start key. If the Stop/Reset button is pressed twice during a workout the
program will end and a summary of your workout is displayed. If the Stop/Reset key is held down
for 3 seconds the console will perform a complete Reset. Pressing the stop key while you are
setting up a program will take you back one step to the previous screen.
There is an Audio Input Jack on the front of the console and built-in speakers. You may plug any
low-level audio source signal into this port. Audio sources include MP3, Ipod, portable radio, CD
player or even a TV or computer audio signal.
Programming the console
Each of the programs can be customized with your personal information and changed to suit your
needs. Some of the information asked for during programming is necessary to ensure the readouts
are correct. You will be asked for your Age and Weight. Entering your Age is necessary during the
Heart Rate control program to ensure the correct settings are entered in the program. Entering your
Weight aides in calculating a more correct Calorie reading; although we cannot provide an exact
calorie count we do want to be as close as possible.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xterra SB540r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xterra SB540r in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info