506567

Xsarius SG-3100 DiSEqC H-H Motor Manual

5
Zoom out
Zoom in
Previous page
1/12
Next page
DiSEqC 1.2 OPERATION
The DisEqC Motor is designed for DiSEqC 1.2 Receiver. The commands of the receivers might be
different, but similar. Please refer to the manual of the DiSEqC 1.2 receiver.
1.Go East / West: Drive the antenna to East / West.
2.Fine Tune East / West: Drive the antenna East / West for one step.
3.Store nn: Store Satellites Position nn (01~60).
4.Goto nn: Drive Motor to Satellite Position nn (01~60).
5.Goto 0°: Drive the Motor to 0° as a referece point.
6.Re-synchronize / Shift:
(a)Drive the motor to a position by Goto command.
(b)Drive the motor East / West to a better position.
(c)Send Re-synchronize commands to the motor. The original position will be shifted to the new
position. All the other Satellite positions are also changed.
Goto X Function
1.See your receiver’s manual and select the type of installation in Goto X mode.
2.Fill in the empty spaces in the receiver’s menu with the Latitude and Longitude values.
When the values have been correctly received, the receiver drives the Motor to the calculated
position.
3.Slightly rotate clockwise or anticlockwise the antenna and the Motor locked together until you
nd an image on the TV-screen connected to the receiver or the signal on the strength eld
meter,and then tighten the xing screws.
LED INDICATOR
The 2 LED indicadors on the bottom of the motor can show the following information:
Function Status
Power on LED1 & LED2 Keep Blinking every 2 Seconds
Drive East LED1 Blinking 1 time
Drive West LED2 Blinking 1 time
Halt LED1 & LED2 Blinking 1 time
Store LED1 Blinking 2 times
East Limit LED1 Blinking 3 times
West Limit LED2 Blinking 3 times
Limit off LED1 & LED2 Blinking 3 times
Goto X LED1 & LED2 Blinking 4 times
Stop East Limit LED1 Keep Blinking
Stop West Limit LED2 Keep Blinking
4
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Xsarius SG-3100 DiSEqC H-H Motor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Xsarius SG-3100 DiSEqC H-H Motor in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info