800733
4
Zoom out
Zoom in
Previous page
1/44
Next page
4 | Instructions for use – Stand-up paddleboard
3
DETACHABLE SKEG ON BACKSIDE OF SUP
BOARD
It is recommended to use the detachable skeg in
deep water, where it will allow you to move forward
in a straight line. Do not use it in shallow water
because then the skeg can hit the bottom. The Skeg
can be placed on the SUP board if this is inated or
deated. To assemble the skeg push the skeg in the
black part on the back side of the SUP board.
4
HOW DOES THE PRESSURE GAUGE METER
WORK?
A pressure gauge measures the pressure the pump
receives during the inating process. As air cannot
escape from the SUP board, pressure builds up and
since the air cannot get out, this pressure will be
shown on the pressure gauge. The gauge expresses
the pressure in PSI and BAR.
The pressure gauge of the pump starts working
when the pressure in the SUP board is high enough,
which may take some time. This means that you
have to pump a lot of air into the SUP board before
the meter starts working. The meter will start
working from the moment you start to feel higher
pressure in the SUP board.
ASSEMBLY INSTRUCTIONS INCLUDED PADDLE
The included paddle consists of 3 pieces.
To adjust the paddle to the required length:
- Insert the bottom of pole 2 in to the top of pole 3.
This can be xed when the pin on pole 2 is clicked
in the hole of pole 3.
- Open the button on top of pole 2 by pulling the
button.
- Insert the bottom of pole 1 and choose the length
that suits you. Click the pin (behind the button) of
pole 2 in to the hole of pole 1.
- The paddle length is adjustable from minimum
length 1.70 mtr to maximum length 2.10 mtr.
HOW TO USE YOUR PADDLE
Don’t use the peddle as support to stand on the
SUP. The peddle is only allowed to be used for
peddling in the water and can break when it comes
in contact with the lake/sea-bed.
ATTACHING THE LEASH
Before you start to use the SUP board rst attach
included leash to the SUP board and yourself.
- Attach the leash to the metal ring on top of the
SUP board.
- Attach the other side of the lease to your ankle.
When you fall in the water the leash ensures that
the SUP board will not oat away.
MAINTENANCE SUP BOARD
- Clean and check the SUP board and all accessories.
Use a mild, non scouring cleanser.
- Make sure the SUP board is completely dry before
placing it in the backpack. Otherwise this may
cause mold, foul odor and the skin/hull or the
inside chambers of the SUP board will suer from
water damage.
REPAIRS
Although the SUP board has been manufactured of
a reinforced and tough material, it is still possible to
cause holes or cracks when the SUP board is handled
improperly. For the repair of a small damage a repair
kit is included.
- Prepare a round patch with repair material with
correct measurements.
- Clean the repair material and the area around the
leak with alcohol.
- Apply 3 thin, even coats of glue to both the surface
of the board and the repair material. Wait 5
minutes between each coat.
- After the 3rd coat, wait 10-15 minutes before
applying the repair material. Use a handroller
to apply the repair material evenly. Pay special
attention to the edges.
- Wait at least 24 hours before re-inating.
- Many tutorials on social media regarding SUP
repairs.
5
HOW TO USE THE VALVE WRENCH TO FIX
LEAKAGE PROBLEMS IN VALVE LOCATION:
A. Deate the board until the top and bottom skin
(PVC) have collapsed.
B. Grab the valve base (3) with your hand through
the bottom layer and hold steady while inserting
the valve tightening wrench (1) into the valve top
(2) and turn the wrench rmly clockwise until
proper sealing is guaranteed.
C. If tightening of valve top (2) was still not
successful unscrew the valve top (2) entirely
turning it counterclockwise and inspect the PVC
opening hole for any wrinkles, tears or debris.
D. If the PVC opening hole looks intact add a thin
layer of repair adhesive (PVC glue) onto the PVC.
E. Tighten the valve as described in B and let the
glue dry in a warm well-ventilated area for 24
hours.
F. After 24 hours inate the SUP to 15PSI and leave
inated for 72 hours to check for air leakage.
6
ADDITIONAL INFO
WHAT IS DROPSTITCH MATERIAL?
All inatable SUP Boards use drop stitch. This
technology ensures that the bottom and top of a
SUP remain connected to each other. Drop stitch
is the technology used to produce a Stand Up
Paddle Board. Hundreds of threads that connect
the top and bottom of a SUP form the drop-stitch
technology. These wires ensure that an inatable
supboard remains in its original form, even under
high pressure.
DEFORMATION
As drop-stitch material is sewed vertically with
threads, there is always 1 place on the SUP with a
deformation”. This deformation, can be explained
logically by the placement of the valve. Due-to-
the valve, no “DROP-STITCH wires” are present at
this location. This, is a deformation inherent to the
design of the SUP and does not have any impact on
the quality.
AIRBUBBLES UNDER THE EVAPAD
The SUPs EVA-PAD can contain 1 or several groups
of tiny bubbles. As this product is completely
handmade, this is completely normal. The layers of
PVC and EVA are glued together by hand. Although
the production process is in a dust-free area some
small particles can settle on the PVC during
manufacturing. These air bubbles are cosmetic, and
will not grow or aect the performance of your SUP
board.
NL INSTRUCTIE
Deze gebruiksaanwijzing dient zorgvuldig
te worden gelezen en opgevolgd. Als u het product
aan derden geeft, dient u ook deze documenten te
overhandigen. Volg de juiste volgorde op voor het
oppompen / leeglaten van het SUP board.
INHOUD
1 Opblaasbaar SUP board
1 Rugzak
1 Aluminium in lengte verstelbare peddel
1 Hand Pomp
1 Koord.
1 afneembare vin
1 Reparatie set
1
1. H3 Ventiel
2. Koord voorzijde
3. EVA Antislip bekleding
4. Handgreep
5. Metaal ring
6. Afneembare vin
WAARSCHUWING
- Stand up peddelen kan zeer gevaarlijk en fysiek
veeleisend zijn. De gebruiker van dit product moet
begrijpen dat deelnemen in stand up peddelen
serieuze verwondingen of de dood tot gevolg kan
hebben.
- Raadpleeg een gecerticeerde of gelicenseerde
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for XQ Max 8DP001330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of XQ Max 8DP001330 in the language / languages: All languages as an attachment in your email.

The manual is 1.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info